Complete Pump, Sundance or Jacuzzi Theramax II, 06020191-1, 1.65HP, 115v or 230V, 17.0A or 8.5A, 48 frame, 2"x 2", 1 Speed

This complete pump and motor is a Complete Pump, Sundance or Jacuzzi Theramax II, 06020191-1, 1.65HP, 115v or 230V, 17.0A or 8.5A, 48 frame, 2"x 2", 1 Speed.. This pump is a 115V or 230V, (1) Speed, 17.0Amp or 8.5Amp, 48 frame 2" x 2" XP2 style pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall style 115V plug this pump may draw too much amperage to work with your heater on a wall plug..

This model LX pump is commonly used to replace Aqua Flo XP2e, 2.0 HP 115/230 Volt 48 frame pump, 1-speed, 2" inlet, 2" discharge pumps..

Dimensions: 15-3/16"L x 8-7/16"W x 8-7/16"H

Always match the amperage when choosing a replacement 115v pump with the previous motor or you could create some over amperage issues with your hot tub..

NOTE: The motor on this pump can vary and may or may not look exactly like the one in the pictures but it will be the same specs..

IMPORTANT MOTOR VARIATION NOTICE

Due to ongoing changes in the hot tub pump industry since COVID, motor appearance and configuration may vary, even when the part number is the same. While the pump wet end will be correct, the motor may differ in areas such as capacitor location, labeling, or housing.

If you have a specific motor requirement (clearance, capacitor position, orientation, etc.), you must contact us before ordering so we can verify availability. Do not order first and contact us after delivery due to appearance differences.

Motor variations are outside of our control and may change week to week. Appearance differences do not constitute an incorrect item if specifications are met.