Complete Pump, Aqua-Flo, 36674, 2.5HP, 230v, 2-spd, 48frame, 2", 1 or 2 speed 10.0A

(3 reviews) Write a Review
SKU:
HTP34-402-KLEH/612KEEEWatkins
Shipping:
Calculated at Checkout
  • Complete Pump, Aqua-Flo, 36674, 2.5HP, 230v, 2-spd, 48frame, 2", 1 or 2 speed 10.0A
  • We do not recommend using this..
  • The wet end on this pump can be turned to different positions. You simply loosen the through bolts on the back of the motor and pull the bolts out and turn the wet end the way you want it turned and put the through bolts back in..Complete Pump, AquaFlo, XP2, 2.5HP, 230v,2-spd, 48frame, 2", 1 or 2 speed
  • The Pressure Side measures about 3" Edge to Edge..
  • The Suction Side measures about 3" Edge to Edge..
  • The wet end on this pump can be turned to different positions. You simply loosen the through bolts on the back of the motor and pull the bolts out and turn the wet end the way you want it turned and put the through bolts back in..
  • The wet end on this pump can be turned to different positions. You simply loosen the through bolts on the back of the motor and pull the bolts out and turn the wet end the way you want it turned and put the through bolts back in..
  • Complete Pump, Aqua-Flo, 36674, 2.5HP, 230v, 2-spd, 48frame, 2", 1 or 2 speed 10.0A
  • Complete Pump, Aqua-Flo, 36674, 2.5HP, 230v, 2-spd, 48frame, 2", 1 or 2 speed 10.0A
  • Complete Pump, Aqua-Flo, 36674, 2.5HP, 230v, 2-spd, 48frame, 2", 1 or 2 speed 10.0A
  • Complete Pump, Aqua-Flo, 36674, 2.5HP, 230v, 2-spd, 48frame, 2", 1 or 2 speed 10.0A
  • Complete Pump, Aqua-Flo, 36674, 2.5HP, 230v, 2-spd, 48frame, 2", 1 or 2 speed 10.0A
  • Complete Pump, Aqua-Flo, 36674, 2.5HP, 230v, 2-spd, 48frame, 2", 1 or 2 speed 10.0A
MSRP: $641.99
$549.99
— You save $92.00

Description

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2 wetend. You would need to assemble this onsite but it is very easy to do and we are happy to help with that if you need it. This will ensure we get you a pump that does the job the first time. We are hoping that this is changed back to the original in the future.
 
This pump is a Aqua-Flo 36674 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 10.0 Amps on high speed and 2.6 Amps on low speed and this pump will work as a one or speed pump..

NOTE about these Replacement Pumps: Watkins Does Not Make Pumps. They buy different brands of pumps and put their numbers on them.. If you want the original Watkins numbers on your new pump we don't offer that.. What We offer is the exact pump or the closest equivalent to the original pump if it is obsolete that they would buy and put their numbers on from the original pump manufacturers. The main difference between one you would buy from them now and ours is the exhaust vent in the back will not come on our pump.. We think it is a bad idea as it does not allow the motor to cool as it was intended to cool and does not have any redeeming quality for you as an end user.. See the below picture for what will NOT come on our pump.. If you must have that feature Watkins is the only source..  

Note: If your original Pump has this on the back with a hose attached none of my pumps will have that nor will they be able to accept this part from your old pump.. You will save 100's of dollars over the original pump with that attachment that is only used to put heat from the motor under the tub and I believe the motors stay cooler without that device and last longer..


  Portable Spa Pump
Speed 2 Speed (2-Spd)
Motor Voltage 230v
Drain Plug Location 4,6,9 o`clock
Pump to Motor Foot Types 9
Suction Style Center
Suction Connection (Physical Dimension) 3-1/16"od
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2"
Discharge Style Side
Discharge Connection (Physical Dimension) 3-1/16"od
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 2.5hp
Motor Frame 48 Frame Thru-Bolt
Motor Amperage/Wattage 10.0A/2.6A
Manufacturer AquaFlo/Gecko
Pump Model Flo-Master XP2
Manufacturer Impeller Number Impeller and Seal Kit for this pump
Volute Fastening Type 8 Screws
Volute/Sealplate Number

92770705

 

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 

For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example.

8.0 = 1 HP

10.0 = 2 HP

12.0 = 3 HP

14.0 = 4 HP

16.0 = 5 HP

 

For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP.

  8.0 = .5 HP

9.0-10.0 = .75 HP

10.0-13.00 = 1 HP

13.5-15.0 = 1.5 HP

16.0-20.0 = 2 HP

Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.

 

NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.

NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.

View AllClose

3 Reviews

  • 5
    Perfect replacement

    Posted by Unknown on Aug 11th 2020

    Exactly what I needed and received it fast.

  • 5
    Wouldn't go anywhere else! !!

    Posted by Unknown on Feb 14th 2017

    Very happy with tech support, product and service. My hot tub is 14 years old and it took less than 30 minutes to change out the motor/pump. Amazing how little time it takes to replace components when you have exactly what you need. Thank you for your help, Harvey Siem

  • 5
    I called and needed Help and Got It !

    Posted by R.D. on Dec 14th 2016

    I found you on line ...... I called and spoke to a guy in Henderson TN, I think ? ...... He was very helpful and gave me the time I needed ..... We talked over the phone a couple of times and he never rushed me .... VERY HELPFUL.

View AllClose