Complete Pump, Aqua-Flo, XP2e, 4.0HP, 230v, 56fr, 2 1/2"X 2" 1 or 2 Speed 12A

(No reviews yet) Write a Review
SKU:
HTP34-402-KL82
Shipping:
Calculated at Checkout
  • Complete Pump, Aqua-Flo, XP2e, 4.0HP, 230v, 56fr, 2 1/2"X 2" 1 or 2 Speed 12A
  • The inlet measures about 3 11/16" across the threads.
  • Complete Pump, Aqua-Flo, XP2e, 4.0HP, 230v, 56fr, 2 1/2"X 2" 1 or 2 Speed 12A
  • The outlet measures about 3" across the threads.
  • Properly wired motor. But look at the tag on the new motor they can vary Complete Pump, Aqua-Flo, XP2e, 4.0HP, 230v, 56fr, 2 1/2"X 2" 1 or 2 Speed 12A
  • Complete Pump, Aqua-Flo, XP2e, 4.0HP, 230v, 56fr, 2 1/2"X 2" 1 or 2 Speed 12A
MSRP: $839.99
$529.99
— You save $310.00

Description


This Jet Pump is found from the factory Rarely in hot tubs so be sure you are choosing the correct one.  

This pump is a 56 frame XP2e called 4.0HP I would call it a 3.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about 3 5/8" edge to edge and 2" pressure side which measures about 3" edge to edge. The amperage is 12 Amps on High Speed and 4.4 Amps on Low making it a 3.0 Horse Power Pump..

Note: You need to be sure of your voltage by checking one of two things. Either the label on the pump which will say either 115V or 230V or you can look to see where the white wire from the pump is located in the pack if you can't see the label. If the white wire is on the red leg or #2 leg the pump is 230V if it is on the Neutral or the White AC leg. Always turn the breaker to the hot tub off before doing any of these checks.   

 If You need a pump Bleeder Barb Click here: Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

Aqua-Flo by Gecko's Flo-Master® XP2e pump is the energy conscious offering within its high performance spa pump line. It's designed for today's large, heavily jetted spas requiring increased flow. The XP2e pump fits within the same envelope as the original XP2 pump, yet provides greater flow while improving the overall energy efficiency of the spa.

Spa Pump Features:
  • Fine tuned impeller that moves water through the system with maximum performance
  • 2 1/2" intake and 2" discharge
  • 56-frame motor for added strength
  • Thermally protected to extend life expectancy of motor

Complete Pump Type Portable Spa Pump
Speed 2 Speed (2-Spd)
Motor Voltage 230v
Drain Plug Location 4,6,9 o`clock
Pump to Motor Foot Types 9
Suction Style Center
Suction Connection (Physical Dimension) 3-11/16" od
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2" or 2 1/2"
Discharge Style Side
Discharge Connection (Physical Dimension) 3" od
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 2.0HP called 3.0hp
Motor Frame 56 Frame Thru-Bolt
Motor Amperage/Wattage 12.0A/4.4A
Manufacturer AquaFlo/Gecko
Pump Model Flo-Master XP2e
View AllClose

Related Products