Complete Pump, 36675-03 LX, Vendor Code 3536, 1.65HP, 115v or 230V, 17.0A or 8.5A, 48 frame, 2"x 2", 1 Speed

This complete pump and motor is a replacement for 36675-03.. This pump is a 115V or 230V, (1) Speed, 17.0Amp or 8.5Amp, 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this high amperage pump and have a tub with a wall style 115V plug this pump may draw too much amperage to work with your heater on a wall plug..

This model LX pump is commonly used to replace Aqua Flo XP2e, 2.0 HP 115/230 Volt 48 frame pump, 1-speed, 2" inlet, 2" discharge pumps..

Dimensions: 15-3/16"L x 8-7/16"W x 8-7/16"H

Please understand Hotspring/Watkins does not make pumps they buy the following brands and put their labels on them so we ship the OEM pumps by Sta-Rite, Vico, Ultrajet, Power Right, Aqua-Flo, and Balboa that are the exact same pump as your original or the closest replacement if yours has been discontinued. The pump you get from us will not have Watkins numbers in them..

Always match the amperage when choosing a replacement 115v pump with the previous motor or you could create some over amperage issues with your hot tub..

NOTE: The motor on this pump can vary and may or may not look exactly like the one in the pictures but it will be the same specs.

NOTE about these Replacement Pumps: Watkins Does Not Make Pumps. They buy different brands of pumps and put their numbers on them.. If you want the original Watkins numbers on your new pump we don't offer that.. What We offer is the exact pump or the closest equivalent to the original pump if it is obsolete that they would buy and put their numbers on from the original pump manufacturers. The main difference between one you would buy from them now and ours is the exhaust vent in the back will not come on our pump.. We think it is a bad idea as it does not allow the motor to cool as it was intended to cool and does not have any redeeming quality for you as an end user.. See the below picture for what will NOT come on our pump.. If you must have that feature Watkins is the only source..  

Note: If your original Pump has this on the back with a hose attached none of my pumps will have that nor will they be able to accept this part from your old pump.. You will save 100's of dollars over the original pump with that attachment that is only used to put heat from the motor under the tub and I believe the motors stay cooler without that device and last longer..