Center Mount, Flow Thru Element, 4.0kW, 115v or 230v, 10", Middle Terminal
(No reviews yet)
Write a Review
- SKU:
- HTP47-555-LA00
- Shipping:
- Calculated at Checkout
Description
This part is a Center Mount 4.0KW Incoloy Heater Element for 230V or 115V Applications.
Center mount means the holes for the electrodes are in the center of the tube to to one side or the other.. This is a very rare style but they are out there..
For the 5.5kw Version of this element click this link: 5.5KW Center Mount Element
Note: When testing this heater if it trips the breaker simply unplug it and if the breaker stays on plug back in and if it trips this heater is the cause if it is not a breaker trip issue then measure between the two terminals with an Ohm meter it should measure about 13.5K ohms. If it measures 0K it is open. If it is not tripping the breaker and doesn't measure open then the heater is not bad look for other issues that cause no heat Like a Pressure Switch, Stopped up filter, No water movement, Open circuit on board etc..
On this particular heater the pressure switch is included and it can cause a no heat condition and can be purchased separately.
Related Products
Center Mount, Flow Thru Element, 5.5kW, 115v or 230v, 10", Middle Terminal
MSRP:
$79.99
$59.99
This part is a Center Mount 5.5KW Incoloy Heater Element for 230V or 115V Applications.
Flow Thru Element, 3.0kW, Incoloy, 10", 115v or 230v
MSRP:
$64.99
$49.99
This part is a Standard 3.0KW Heater Element 115v or 230V that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes.
This also fits Gecko, ACC, and most...
Heater Element 4.0kW Universal 10" 115v/230v M7 Bend Incoloy (Good)
MSRP:
$69.50
$44.99
This part is a Standard 4.0KW Heater element that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes.
Heater, Flo Thru, Balboa M7, 15" x 2", 230v or 115v , 4.0kW, with Sensors
MSRP:
$322.69
$189.99
Balboa Water GroupStainless steel replacement heater assembly, 4.0kW, 230v or 115v, the inside Diamater of the tube is 2" and the overall length of the tube is 15" not including the split nuts on...
HydroQuip, Rite Fit, 4.0kW, 230V, Flow Thru, Heater, Replaces C2400-5003
MSRP:
$258.99
$189.99
Universal Rite-Fit Gecko Series heater assembly, 2.25”x 15”, 304SS, multiple PSI taps, adjustable cover plate, and adjustable studs. Includes 2”x2” tail pieces 2” ridged gaskets.
<
Heater, Flo Thru, Balboa M7, 800, 825, 15" x 2", 230v or 115v , 4.0kW, with Sensors
MSRP:
$289.99
$219.99
This part is a complete Heater, Flo Thru, Balboa M7, 800, 825, 15" x 2", 230v or 115v , 4.0kW, with Sensors..
This heater tube has a stud on the top and bottom make sure yours has them too....
Heater, Flo Thru, Balboa, RS101, VS100, 10" x 2", 4.0kW, 230v
MSRP:
$339.99
$249.99
You are purchasing a New 115V or 230V 4.0kw VS100 or RS101 Balboa Spa Hot Tub Heater Assembly with Cord and M7 Sensors. This heater is found on some 115V or 230V Viking, RS101 Dream Maker Brand Hot...
Retrofit ePACK Control Pack, (2) Pump, Ozone and 4.0kW, 115v or 230v
MSRP:
$749.99
$559.99
The ePACK is a universal replacement spa control system that features a water sensor instead of a pressure or flow switch so this pack will work plumbed in the pressure or suction side...
Retrofit MODPACK Control Pack, (2) Pump, Ozone and 4.0kW, 115v or 230v
MSRP:
$769.99
$589.99
The MODPACK 101 is a universal replacement spa control system. Heater assembly is 15″ long, it is mounted to the back of the enclosure. To simplify the replacement process, heater...