Balboa Board VS100 115V or 230V Fits RS101 Dreammaker Viking and More..

(No reviews yet) Write a Review

SKU:: HTP58-138-ALEE
Shipping:: Calculated at Checkout

Balboa Board VS100 230V Fits RS101 Dreammaker Viking and More..

MSRP: $459.99

$319.99

— You save $140.00

Current Stock: 3

Quantity:

Description

Description

This part is a New VS100 Balboa Spa Hot Tub Board. This board replaces systems found in Viking Spas, the RS101 by Dream Maker Brand Hot Tubs and many more. This board can be used 120v or 240v.

Note For Some Dreammaker Owners: The original configuration of the Topside Overlay from Dreammaker is Temp Up, Temp Down, Jet and then Light, Left to right.. This system does not work with that configuration so you will need a new overlay with the layout Jet, Light, Temp Down, Temp Up to change when you install this circuit board. If you have other versions of button configuration this system will probably work with it..

Click here for the new overlay.

This System also uses M7 sensors and they can be purchased separately along with other parts in the links below..

Balboa Spa Hot Tub Heater M7 Sensor Replacement T emp & Hi Limit Video How To

Heater, Flo Thru, Balboa, RS101, VS100, 10" x 2", 1.0kW, 115v, Viking, Dreammaker

Balboa Control Pack VS100 115V Fits RS101 Dreammaker Viking and More..

Balboa Board VS100 230V Fits RS101 Dreammaker Viking and More..

Manufacturer:Balboa
Circuit Board Application:Dream Maker Spa
Circuit Board Model:RS101
Chip Number:RS101R1(x)
Board Note:M7

Please Note: Circuit boards are a final sale and cannot be returned.

View AllClose

Related Products

Related Products

Balboa Control Pack 115V Fits RS101 Dreammaker Viking and More..

MSRP: $589.99

$489.99

This part is a RS101 Balboa Spa Hot Tub Control Pack with 115V GFCI Cord. This pack is found on Viking, RS101 Dream Maker Brand Hot Tubs and many more. This pack features a 120v cord and...

Heater, Flo Thru, Balboa, RS101, VS100, 10" x 2", 1.0kW, 115v, Viking, Dreammaker

MSRP: $339.99

$249.99

You are purchasing a New 115V 1.0kw VS100 or RS101 Balboa Spa Hot Tub Heater Assembly with Cord and M7 Sensors. This heater is found on Viking, RS101 Dream Maker Brand Hot Tubs and many more. This...

Heater, Flo Thru, Balboa, RS101, VS100, 10" x 2", 4.0kW, 230v

MSRP: $339.99

$249.99

You are purchasing a New 115V or 230V 4.0kw VS100 or RS101 Balboa Spa Hot Tub Heater Assembly with Cord and M7 Sensors. This heater is found on some 115V or 230V Viking, RS101 Dream Maker Brand Hot...

Terminal Block 6 Position 40A 115V or 230V for Balboa Duplex Digital Boards

MSRP: $49.99

$39.99

This part is a Terminal Block 6 Position 40A 115 or 230V.. that fits Balboa Duplex Digital and Super Digital Board System with (6) Tabs to connect the board to the components..

Overlay, Balboa, MVP/VL260, Warm, Cool, Jets, Light, Dreammaker

MSRP: $32.99

$27.99

This part is an Overlay that fits some Dreammaker Hot Tubs, E4 Oval, Warm, Cool, Jets, Light.. This overlay is found o

This is a Balboa Retrofit Complete control system that will run (2) Jet Pumps or (1) Jet Pump and a Blower , it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 4 Button Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system. — Quick view

This is a Chart of the different Pack Kits and what they will and will not operate. — Quick view

NLA Control Retrofit Balboa VS501Z, 2 Pump ,5.5KW,115V OR 230V, W/ Light and Cords

MSRP: $1,238.49

$599.99

This system is no longer made the replacement would be this one: Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP500 Topside This is a Balboa Retrofit...

Heater, FloThru, Balboa, M7, 15" x 2", 230v, 5.5kW, with Sensors — Add to Cart

Quick view

Heater, Flo Thru, Balboa, M7, 15" x 2", 230v or 115v, 5.5kW, with Sensors

MSRP: $379.43

$224.99

Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW, 230v or 115V. This heater measures 2" Inside Diameter of the tube and the length of the tube is 15" with 2" unions that...

This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 3 Button Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system. — Quick view

This kit comes with a 3 button duplex topside with a Black Out plate that measures 8 9/16" long x 3 1/2" wide to take up the space if you are replacing a larger topside system.
This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 3 Button Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system. — Quick view

NLA Control Retrofit Kit Balboa VS500Z, 1 Pump ,5.5kW,115v or 230v, With Light and Cords

MSRP: $1,263.74

$582.91

This system is no longer available from the manufacturer.. Click here for a replacement system: Retrofit MODPACK Control Pack, (2) Pump, Ozone and 5.5kW, 115v or 230v This is a Balboa Retrofit...

This is a Balboa Retrofit Complete control system that will run (1) Jet Pump, it will also run (1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube and Sensors, a 4 Button Topside, a Light wire and bulb Kit and the Amp Cords needed to operate the items the system will run. Note:If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system. Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system. — Quick view

This is a chart that you can use to see what the different kits will and will not run. — Quick view

Control Retrofit Kit Balboa VS500Z Mini Oval, 1 Pump ,5.5KW,115V OR 230V, W/ Light and Cords

MSRP: $1,179.51

$579.99

This is a Balboa Retrofit Complete control system that will run (1) Jet Pump ,(1) Circ Pump if equipped, and Ozonator and a Light. It comes with the pack which includes a Board, Heater and Tube...