Hot Tub Parts of America

This part is a Heater, FloThru, Universal Fit, 15" x 2", 230v, 4.0kW..  This heater will work in place of the following heaters: 1563-08 , 20-00245 , 20-00317 , 20-00318 , 20-00319 , 20-00324 ,...

This part is a 5.5kw 15" long Heater Flo Thru Tube found in Waterway Neo Series control packs.. You can replace just the element and not the tube and save some money the kit can be found here: (D)...

Heater, FloThru, Watkins TR, 15" x 2", 4.0kW, 230v, Generic Note: This heater does not have a Pressure Switch port or studs for the ground bar..   Housing Configuration  ...

This part is a Stainless steel aftermarket replacement heater assembly that fits systems using a pressure switch positioned 90 degrees from the heater terminals. 5.5kW/230v with 1/8"npt pressure...

Leisure Bay Stainless steel, 17-1/2" x 3" 4.0kW/230v replacement heat exchanger. Made for use exclusively on Leisure Bay hot tubs. The original heater may have used a redundant hi-limit, if that is...

Arctic Spas ReplacementStainless steel replacement flow thru, L shaped heater assembly with a 5.5kW/230v incoloy element. This is an aftermarket heater made for use on Arctic Spas. Heater gaskets,...

This heater is obsolete but there is a universal retrofit kit to replace it.. You can find that kit at this link: Universal, Low Flow, Retrofit Heater, 5.5KW ,Retrofit Kit 1" or 3/4" Hurricane...

This part is a Complete Trombone Heater that is about 23" X 10" X 15" Squareback 3-Wire with Built in Thermal Cut-Out. Includes Titanium Heater Element and Hi-Limit Disk. This heater fits a lot of...

This part is a complete trombone heater found in some Jacuzzi Premium and Sundance Hot Tubs it is a 16.7AMP / 26" Length Trombone Style with Built in Thermal Switch. Used in Sundance/Jacuzzi Spa...

Dynasty Replacement Heater.Vertical heater assembly, 3" x 11" with 3/4" barb x 3/4" 90&deg barb inlet/outlets, 5.5kW/240v I have one of these left..  NO Longer Available Note: Therm...

NOTE: This heater is No Longer available so your only choice is this heater Click this Link.. Sundance SpasVertical heater assembly 3-1/2" x 13" with 3/4" barb x 3/4" 90° barb inlet/outlets...

This part is a 2 1/2" Heater Split Nut with a Gasket which measures 3 9/16" Inside Diameter of the threads and 3" inside the ceneter part that wraps around a heater tube or body. The Heater Flange...