Hot Tub Parts of America

This part is a Complete Short Body Air Control that requires a 1-3/4" hole size has a 2-1/2"face diameter a Designer Cap and is Gray 1" Slip glue fitting..The pipe or fitting that would glue inside...

This part is a Hydro Air 1/2" Top Draw Air Control Stem Assembly only.. It measures about 1 11/16" Across the top and the threaded hole this would screw in would be about 3/4" Wide.. the shaft from...

This part is a Hydro Air 1" Top Draw Air Control Stem Assembly only.. It measures about 2 5/8" Across the top and the threaded hole this would screw in would be about 1 3/8" Wide.. the shaft from the...

This part is a Complete Black Notched Air Control Valve made by Waterway with a Plunger Style System.. The glue fitting is 1" Slip which will accept a 1" pipe or fitting that would measure about 1...

This part is a complete 1" Air Control Gray..  Top access air Control. Hole size 1-5/8" Plumbing Size    1"Hole Size    1-5/8"Face Diameter  ...

Waterway PlasticSide output LO-PRO injector. 3/4" hole required for installation

This part is an Air Injector Connector, HydroAir, 3/4"spigot x 3/8"barb. This part receives a 3/4" Flex pipe in the spigot side that would measure about 1" Outside diameter and then a 3/8" Inside...

Waterway PlasticSide output LO-PRO injector. 3/4" hole required for installation

Waterway PlasticTop-Flo air injector. 1-3/16" hole size required for installation

This part is an Air Injector Jet Body 3/8" Barb Accepts 3/4" Thread in Injector Part with 1 1/4" Face. This Part is installed by adding clear silicon to the flange and screwing the flange into...

This is a White Air Injector Jet and Tee Style Body. it is a Top Flow Type and receives a 1" Inside Diameter pipe on each side which would measure about 1 1 /4" outside diameter and is a Salt &...