Hot Tub Parts of America

This part is a 90 Sweep Ell 1 1/2" Street X 1 1/2"Slip PVC Plumbing Fitting. The 90 Sweep ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2"...

This part is a 90 Ell 1 1/2" Street X 1 1/2"Slip PVC Plumbing Fitting. The 90 ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2" fitting on the...

This part is a (1) 90 Ell 1 1/2" Street X 1 1/2"Slip with an 3/8" FPT hole in the side.. The 90 ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2"...

This parts is a Sweep 90 2" Slip X 2" Slip PVC Plumbing Fitting. The Sweep 90 ELL receives a 2" fitting on each side which would measure 2 3/8" ID.. You can Glue any 2" fitting to make a tight...

This part is a (1) Sweep 90 2" Street X 2"Slip PVC Plumbing Fitting. The Sweep 90 ELL receives a 2" fitting on one side which would measure 2 3/8" and then slips into a 2" fitting on the other side...

This part is a 90, Street Ell,  Elbow, 1" Slip x 1" Street/Spigot.. This part accepts a 1" Pipe or fitting on the slip side that would measure about 1 1/4" Outside Diameter and glues inside of...

This part is a 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, P-Switch and Assorted Plumbing Fittings.. Heater Type - Square Flange Wattage - 5...

This part is a 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, Thermostat, P-Switch.. Heater Type - Square Flange Wattage - 5.5kW, Voltage -...

This is a 2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 2HP Motor that has about 10.0 Amps on High Speed. This Impeller fits between the...

Oval KP-2100 topside control panel with LED screen made by ACC for their ePack, UniPack and Smartouch line of spa packs. This topside measures 4-1/2" x 2" and it has a 5 foot ribbon cable. This...

This Kit is an ACC Smart Touch E-Pac LF with low flow heater Set Up. The heater on this unit isused with spas that have a low flow circulation pump such as a Laing or Grundfos pump. This unit will...

This part is an Adapter Fitting, 1 1/2" Slip x 1 1/2" Male Pipe Thread.. This part is used to connect 1 1/2" plumbing to swimming pool pumps with threaded 1 1/2" connections..  The slip...