Hot Tub Parts of America

This part is a 90 Elbow, 2" Street x 2" Street.. This fitting measures about 2 3/8" OD on each end and would glue inside of 2" fittings that would measure about 2 3/8" ID..  PVC Pipe...

This part is a 90 Elbow, 3/4"slip x 3/4"spigot..  This part accepts a 3/4" Pipe or fitting on the slip side that would measure about 1" Outside Diameter and glues inside of a 3/4" fitting on...

This part is a 90 Elbow, Sweep, 1-1/2" Slip x 1-1/2" Slip.. It will receive a pipe or fitting that measures about 1 7/8" Outside Diameter on both ends..  Air Blower Fitting...

This part is a 90 Sweep Ell 1 1/2" Street X 1 1/2"Slip PVC Plumbing Fitting. The 90 Sweep ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2"...

This part is a 90 Ell 1 1/2" Street X 1 1/2"Slip PVC Plumbing Fitting. The 90 ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2" fitting on the...

This part is a (1) 90 Ell 1 1/2" Street X 1 1/2"Slip with an 3/8" FPT hole in the side.. The 90 ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2"...

This parts is a Sweep 90 2" Slip X 2" Slip PVC Plumbing Fitting. The Sweep 90 ELL receives a 2" fitting on each side which would measure 2 3/8" ID.. You can Glue any 2" fitting to make a tight...

This part is a (1) Sweep 90 2" Street X 2"Slip PVC Plumbing Fitting. The Sweep 90 ELL receives a 2" fitting on one side which would measure 2 3/8" and then slips into a 2" fitting on the other side...

This part is a 90, Street Ell,  Elbow, 1" Slip x 1" Street/Spigot.. This part accepts a 1" Pipe or fitting on the slip side that would measure about 1 1/4" Outside Diameter and glues inside of...

This part is a 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, P-Switch and Assorted Plumbing Fittings.. Heater Type - Square Flange Wattage - 5...

This part is a 90° Heater Assembly, Brett Aqualine, Plastic Manifold, 5.5kW, 230V, w/Hi-Limit, Thermostat, P-Switch.. Heater Type - Square Flange Wattage - 5.5kW, Voltage -...

This is a 2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 2HP Motor that has about 10.0 Amps on High Speed. This Impeller fits between the...