Hot Tub Parts of America

You are purchasing a Cal Cover Style Hot Tub Spa Cover Strap Latch Repair Kit with (6) Lock Latches, (6) Strap Repair Buckles and (6) Latch Clips with (18) Screws and (2) Keys that fits the original...

This kit is a Watkins Style Hot Tub Spa Cover Strap Latch Repair Kit with (6) Lock Latches, (6) Strap Repair Buckles and (6) Latch Clips with (18) Screws and (3) Keys that fits the original Factory...

This part is a Balboa Heater M7 Sensor with a 82" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi...

This part is a Set of (8) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about...

This kit is a Watkins Style Hot Tub Spa Cover Strap Latch Repair Kit with (8) Lock Latches, (8) Strap Repair Buckles and (8) Latch Clips with (24) Screws and (4) Keys that fits the original Factory...

This part is a 9" Fat Graphite Single Pin pillow with the number 25702-247 in the back of it.. This pillow fits Hydro Spa, Premium Leisure and Platinum Legend and Others. It is 9" long and  It...

90 Elbow, 1-1/2" Slip x 1-1/2"mpt, Male Pipe Thread ASTM D-2466 Socket Type Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Sch 40. PVC Pipe Fitting Type Ell, 90 deg First Plumbing...

This part is a 90 Elbow, 1 1/2"street x 1 1/2"street..  This part glues inside of a 1 1/2" fitting on both sides that would measure about 1 7/8" Inside Diameter..   PVC Pipe...

This part is a 90 Elbow, 1/2"slip x 1/2"spigot..  This part accepts a 1/2" Pipe or fitting on the slip side that would measure about 3/4" Outside Diameter and glues inside of a 1/2" fitting on...

This part is a 90 Elbow, 2" Street x 2" Street.. This fitting measures about 2 3/8" OD on each end and would glue inside of 2" fittings that would measure about 2 3/8" ID..  PVC Pipe...

This part is a 90 Elbow, 3/4"slip x 3/4"spigot..  This part accepts a 3/4" Pipe or fitting on the slip side that would measure about 1" Outside Diameter and glues inside of a 3/4" fitting on...

This part is a 90 Elbow, Sweep, 1-1/2" Slip x 1-1/2" Slip.. It will receive a pipe or fitting that measures about 1 7/8" Outside Diameter on both ends..  Air Blower Fitting...