Hot Tub Parts of America

This Wet End is a 2" x 2" 1.5HP 48 or 56 frame Ultimax Vico® that would normally be found an a 230V pump with 9.0 Amps High speed or 14.0 Amps at 115v..  This side discharge, 2" x 2" mbt...

This Wet End is a 2" x 2" 2.0HP 48 or 56 frame Ultimax Vico® that would normally be found an a 230V pump with 10.0 Amps High speed or 16.0 Amps at 115v..  This side discharge, 2" x 2" mbt...

This part is a Complete 1 1/2 HP 48 Frame Vico Wet End that is very unusual with the Heat Blanket Circulation Nipples.. It is 1 1/2" x 1 1/2" meaning it measures about 2 3/8" edge to edge on the...

This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 2.0HP impeller which would fit a motor that has 10.0 amps at 230V and 16...

This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 3.0HP impeller which would fit a motor that has 10.0-12.0 amps at 230V...

This item is a 48 Frame Vico Wet End with 2" x 2" inlet and outlet that would measure about 3" across the threads and it has a 4.0HP impeller which would fit a motor that has 12.0-14.0 amps at 230V...

This part is a 48Frame Center Discharge 1 1/2 x 1 1/2" 1HP Waterway Wet End.. The threads would measure about 2 3/8" Edge to Edge.. This wet end would be found on a 115V motor with an Amperage of...

This part is a Complete Verticle Mount Style Waterway Iron- Might or Uni-Might 1/15thHP Wet End that is 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Adjustable Suction Side...

Waterway Viper Complete 3HP Wet End fits on a Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... If you don't need a complete wet end a list of...

Waterway Viper Complete 4HP Wet End fits on a Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... If you don't need a complete wet end a list of...

Waterway Viper Complete 5HP Wet End fits on a Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads... If you don't need a complete wet end a list of...

This part is a Complete Wavemaster 5000 1.0HP Wet End 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. Vendor Code 4081   The...