Hot Tub Parts of America

This part is a Gray Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 1" Slip x 1" Slip Single Port.. To...

This pump is a  Vendor Code # 3861 Sta-Rite Relia Flo 2'X 2" Side Discharge 48Fr 230V 2.5HP Pump Complete.. Watkins Hot Tubs have many brand names: Hotspring, Caldera, Tiger River, Hot...

This Part is a Wet End O-Ring for a 48 or 56 Frame Face Plate for a Vendor Code 3536 Intertek Brand Pump Wet End only.. It is about 6 3/8"" Inside Diameter and about 1/8" Thick..      ...

This part is a Wear Ring that only fits LX Vendor Code 3536 Impellers for a 48 or 56 Frame Pump Wet Ends and measures 13/16" thick from front to back... LX Pumps..  

This 3.0HP Horse Power 6.0 Amp (1) Speed 56 Frame Complete Pump..   This is a Direct Replacement Cal Spa Part # PRC014X Motor Voltage 230v Speed 1 Speed (1-Spd) Motor Amperage/Wattage 6...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 2.5hp,which would be 10-11.0...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 4.0hp,which would be 13-14.0...

This Filter is a 40 Square Foot Filter Cartridge that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter...

This part is a Viking or Destiny River Topside, Balboa, E4 Oval, Jets, Jets, Temp, Light works for 1 or 2 Pump Systems 7' Long Cord. It has an 8 pin Cat 5 Phone Style plug and a cord that is...

This part is an Overlay for some Viking Spas, E4 Oval, Jets, Jets, Temp, Light works for 1 or 2 Pump Systems. Manufacturer    VikingButtons    4Topside...

You are buying a Balboa 4 Button Overlay for a Viking Spa Topside for a Pump and a Light. This is a Large Oval with the button configuration of Jet, Light, Cool, Warm left to right. This Overlay...

This kit is a Waterway Viper 3.0HP Impeller, Seal, (1) Bearing, Install Tool and Silicone.. A Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads.....