Hot Tub Parts of America

This part is a Tee that is 2"Slip x 2" Slip x 3/4" FPT.. This part is usually found in plumbing with spigot screwed into it.. Note there are 2 Spigot sizes 3/4" and 1/2" Threaded..   If you...

This part is a Tee, 3/4"slip x 3/4"slip x 3/4"slip.. This tee receives a piece of 3/4" Pipe or a street fitting that would measure about 1" Outside Diameter.. The Inside Diameter of the 3 fittings...

This part is a Tee, Reducing, 2"slip x 2"slip x 3/4"slip.. This part will receive into the slip fittings a pipe or fitting on each end that would measure about 2 3/8" Outside Diameter...

Temperature sensor for the Jacuzzi J-400 and J-1000 models from 2010 - current that uitilize the Nidec Spa pack that has the different colored rubber molded plugs, called a DSMT plug. This sensor has...

Temperature Thermister, aka temp sensor for the Watkins made Solana and Hot Spot hot tubs from 2003 forward. This sensor has a 3/8" bulb and a two wire, four pin JST plug that connects to the circuit...

This part is a Terminal Block 6 Position 40A 115 or 230V.. that fits Balboa Duplex Digital and Super Digital Board System with (6) Tabs to connect the board to the components.. 6 position terminal...

ThermostatsSingle pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This...

Thermowell Temperature Sensor Mount in White. This dry well mount accommodates 3/8” temperature sensors from brands like Balboa, Gecko, Hydro Quip, and others. 1-1/4” hole size required...

This part is a Black Universal Temperature Sensor Mount that accommodates 3/8” temperature sensors from Balboa, Gecko, Hydro Quip, and others. 1” hole size required. Thermowell...

This part is a Threaded Jet Body, Waterway Adjustable, Cluster Storm, Air 3/8"barb x Water 3/4"barb to be used to the new style thread in Cluster Storm jets.. Do Not order these for the old...

This is a 1-1/4"npt Plug Element that is 9 3/4" long and it threads into a fitting in the plumbing.. With 10-32 thd studs, dual 5/16" thermowells, predrilled holes for mounting junction box 1-1/4"...

This part is a Jet Internal, Waterway Power Storm, Thread-In style. 5 Scalloped and Gray, 5" face, with Single Roto style internal and Adjustable on/off control.