Hot Tub Parts of America

This Kit is an 5HP Impeller for an Executive 48 Frame Wet End up to 5HP Motor and a 56 Frame Wet End 5HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet...

Tnei part is no longer available you can only order the complete wet end found Here: Wet End, Waterway, Uni-Might, Iron-Might, 1.0HP, 1-1/2", 48 frame, 1.4A/115v Waterway Iron Might Circulation Pump...

This item is a 1.0HP Waterway HiFlo Pump Impeller "C".. If Your motor is 115V the amperage would be about 12 Amp if 230V it would be about 10 amps..Closed face impeller made for the HiFlo...

This item is a 3/4HP Waterway HiFlo Pump Impeller "B".. If Your motor is 115V the amperage would be about 11 Amp if 230V it would be about 7 amps..Closed face impeller made for the Hi-Flo...

Waterway 4 HP Hi-Flo closed faced impeller for Hi-Flo side discharge wetends that have part number 315-1160 on the rear. This impeller will fits motors that have a 230 Volt 12-13 amp rating. The...

Waterway Viper Pump 3.0 Impeller exclusively for A Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads...I have found this 3HP pump impeller to be on...

Waterway Viper Pump 5.0 Impeller exclusively for a Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads...I have found this 5HP pump impeller to be on...

This 1.65HP Impeller fits a Watkins Vendor Code 0108 Wet End.. It can be found under the Name Wavemaster 7000 on Hot Spring, Caldera, Tiger River, Solana or Hot Spot tubs... You need to look at the...

Plug End Rainproof GFCI (15amp)14-3 SJTW 15` long cord plug end GFCI GFCI Type    Power CordMounting    Cord MountGFCI Amperage    15AGFCI...

This part is a Spa Frog In-Line System Canister & Insert.. The canister body overall length the top and bottom together to the end of the bottom barb is 20 5/8".. The two barbs are 3/4" outside...

This part is a Heater Assembly, Gecko, Heat.Wav, IN.YJ, 1.0/4.0kW, 120/240v, 2" x 15", w/Temp and Flow Sensors, w/4' Terminated Cable Heater Type Flow Thru Heater Wattage 4.0/5...

This Part is a Heater Indicator Light 1/4" mounting hole used to indicate a heater or pump working in a 115V system.. Indicator Light Type    Two-PieceColor  ...