ACC, E-Pak, Low Flow, Spa Control, (1) Pump & Blower or (2) Pump, Light

This Kit is an ACC Smart Touch E-Pac LF with low flow heater Set Up. The heater on this unit is
used with spas that have a low flow circulation pump such as a Laing or Grundfos pump. This unit will control a low flow circ pump, 2 speed primary pump, a single speed blower or a single speed secondary pump, ozonator, and a 12 volt light.

This system is convertible and may be run on 240 or 120 volts.

The E-Pak LF includes complete control, 15" heater tube with 3/4" Barb Connections that screw on each end. One 90 Degree and One Straight 3/4" Barb, topside control panel, and all cords 

The topside that comes with this unit measures 2.5" x 5.5" and requires a 4.65" x 1.75" hole. It has a 5 foot ribbon cable standard. If you need a longer topside cable you can purchase an extension from the links below:

Topside Ribbon Cable Extension, ACC, Smartouch and Modpack, 5 Foot

Topside Ribbon Cable Extension, ACC, Smartouch, 10 Foot

You can also add Wifi and Fiber Optic Support on this unit, see below:

Wifi: ACC / Modpack BWF Wifi Module For Smartouch Digital, Modpack, ePack and Uni Pack

Fiber Optics (Must be purchased at the same time as the system):  Retrofit MODPACK Fiber Optic Option This is in Addition to a New Modpack purchase