4HP WUA 400B Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2 1/2" X 2"

Read This Note First!!

NOTE: This Wet End is a Very Rare Wet End 2 1/2" X 2" and will have the number WUA400B-II or WUA400B-I NOTE The (B) the regular WUA400 wet end 2" x 2" does not have the (B)..

This 4 Horse Power 56 Frame Pump Wet End fits Intertek LX Brand Pump Motors only. These pumps usually have the part number WUA-400B. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4 13/16" from the back to front edge. The Suction Side is 2 1/2" which measures about 3 5/8" across the thread edge to the edge and Pressure Side 2" Fitting measures about 3" edge of the thread to the edge of the thread. 

This wet end comes complete with the Impeller, Seal and Wear Ring already installed.. 

NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange! 

If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..

For the bleeder barb for this wet end Click Here:  Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads