1HP 48FR WUA 100 Spa Hot Tub Pump Wet End fits Guangdong LX Pumps 2" X 2"

NOTE: There are 48 and 56 Frame verison of these wet ends so be sure you check yours before ordering.. The difference is the position of the thru bolts of the motor and the size of the motor it mounts to.. The 48 Frame version measures 3 5/8" in a square pattern meaning vertical or horizontal in an X pattern it measures 5 3/16".. On a 56 Frame version measures 4 1/8" in a square pattern meaning vertical or horizontal in an X pattern it measures 5 3/4"..

This 1 Horse Power 48 Frame Pump Wet End fits Guangdong LX Brand Pump Motors only that would be about 8.0 Amps at 230V or 12.0 Amps at 115v... These pumps usually have the part number WUA-100, WP-100 or LP-100 on the label. Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4 13/16" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. 

NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange! 

If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..

Click this link for the new Style Bleeder Barb: Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads

Note: This Wet End Fits Guangdong Chinese LX and LP series Pumps only Some Pump Part numbers are as follows: (WUA100-II, WUA100-I)  (LP100) (WP100-II/,100-I)