1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536

(No reviews yet) Write a Review
SKU:
HTP56WUAAEE-IIWatkins
Shipping:
Calculated at Checkout
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536
  • We do not recommend using this..
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536 3" across the threads..
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536 2" Pressure Side measures 3" across the threads..
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536
  • This wiring diagram is for 1 or 2 speed pumps.. When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • This wiring diagram is for 1 or 2 speed pumps.. When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536
  • 1019801-03, Spa Hot Tub 56Fr intertek LX Pump 2" X 2" 2.0HP 2 Speed 230V 3536
  • Compare your screws to be sure that this is the correct wet end.
MSRP: $619.99
$449.99
— You save $170.00

Description

This 2.0HP Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a LX Pump Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 1019801-03 on the label.

It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 15" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. 

For the Bleeder Barb That fits this pump click Either of these links one is a 1/4" and one is a 1/2":

Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads

Pump Bleeder Barb, Watkins, Wavemaster, LX, 1/2" Barb x 1/4"Mpt

NOTE: This Pump looks a lot like an Aqua-Flo and a CMP Pump and they will interchange if you replace the entire pump! 

NOTE about these Replacement Pumps: Watkins Does Not Make Pumps. They buy different brands of pumps and put their numbers on them.. If you want the original Watkins numbers on your new pump we don't offer that.. What We offer is the exact pump or the closest equivalent to the original pump if it is obsolete that they would buy and put their numbers on from the original pump manufacturers. The main difference between one you would buy from them now and ours is the exhaust vent in the back will not come on our pump.. We think it is a bad idea as it does not allow the motor to cool as it was intended to cool and does not have any redeeming quality for you as an end user.. See the below picture for what will NOT come on our pump.. If you must have that feature Watkins is the only source..  

Note: If your original Pump has this on the back with a hose attached none of my pumps will have that nor will they be able to accept this part from your old pump.. You will save 100's of dollars over the original pump with that attachment that is only used to put heat from the motor under the tub and I believe the motors stay cooler without that device and last longer..

 

 
View AllClose

Related Products