This Seal Kit that includes the Seal, Bearing, Silicon and Seal tool and is used ONLY in Guangdong LX Brand Wet Ends. It is 1 39/64" Across the back of the Spring Seal part that goes into the volute or wetend back and the Ceramic & Rubber part that goes into the impeller is 1 11/32". The Hole in the ceramic part is about 3/4" and the hole in the spring side measures about 45/64". The bearing measures 1 37/64ths outside edge to edge and the inside measures 43/64ths and the width is 15/32nds. This bearing does fit these motors.. NOTE: This seal looks a lot like a 1000 Seal used on Waterway pumps they do not interchange!
Note: This Seal Fits Guangdong Chinese LX and LP series Pumps ONLY Some Pump Part numbers are as follows: (WUA200-II/WUA300-II/WUA400-II/WUA200-I/WUA300-I/WUA400-I) (LP200/LP250/LP300/LP150) (WP200-II/WP250-II/WP300-II/WP200-I/250-I/300-I/400-I)
To Install you should put silicon sealant on the back of the Metal part and gently push it into place with a 1" coupler as the push tool. Also the rubber part can use a light coat of silicon to slide it into place in the impeller.
We offer these alone, with The Professor's Silly Juice or with an Impeller in a kit so look in our store. Note: We offer this seal with the seal tool and silicon only or the seal with the seal tool, silicon and an impeller in our store.Choose with care, I Do Not accept returns so be sure these are correct before ordering!I do offer FREE SHIPPING within the United States.
1000, VG-1000, USSPS1000B, 5250-106, AS-1000, 071734S, PS-1000,319-3100B,waterway, executive, hiflo, hi-flo, wet end, wet end, spa wet end seal , hot tub wet end seal, 1000 seal, p-1000 seal, ps-1000 seal, p 1000 seal, ps 1000 seal
Visit our Store as we also offer these and other associated products and accessories for your Spa.
Please note: When you have a seal leaking in most cases you will need an impellor because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impeller. In some cases you will need a front bearing too but not in all cases. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
The seal and bearing kit was perfect just as advertised and the videos on how to determine which pump and how to install the kit were great. While fairly mechanically inclined I probably would have taken the pump to a repair shop without your videos. The pump is back together and working great.