Jet Pumps, Complete
Jet Pumps, Complete
Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5 The 10.0 is the high amperage in this example.
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8 The 10.8 is the high amperage in this example and would equate to a 1 HP.
8.0 = .5 HP
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/aqua-flo-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/intertek-lx-chinese-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/jacuzzi-sundance-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/sta-rite-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/vico-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/waterway-complete-pumps/
https://hottubpartsofamerica.com/pumps-and-related-parts/jet-pumps-complete/watkins-wavemaster-complete-pumps/
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting
MSRP: $21.99$16.99This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...MSRP: $21.99$16.99 -
Hotspring, Watkins, Vendor #4081, (2) Bearing, Shaft Seal Kit with Silicon & Tool, Wavemaster
MSRP: $54.99$39.99This Kit Fits Watkins, Vendor #4081, Wavemaster Pumps found under the name Wavemaster. This Kit Features (2) Bearings, (1) Seal and (1) 1/2oz Tube of The Professor's Silly Juice a Specially Formulated for Hot Tubs Silicon Sealer. Note: Watkins...MSRP: $54.99$39.99 -
Hotspring, Watkins, Vendor #4081, Wavemaster, Shaft Seal Kit, Silicon & Tool
MSRP: $18.99$14.99This kit Fits Watkins, Vendor #4081, Wavemaster XP2 Pumps found under the name Wavemaster with the Vendor Code 4081 only.. Features (1) Seal for XP2 Pumps on Hotspring Watkins Hot Tubs, Seal Install Tool and (1) 1/2oz Tube of The Professor's Silly Juice...MSRP: $18.99$14.99 -
Spa Hot Tub Pump Universal Connect Kit Air Bleeder Plug 1/4" Mpt X 3/8" Barb with Sealer Fitting
MSRP: $19.99$14.99This Kit is a Universal Air Bleeder Connect Kit with (1) 1/4" Mpt X 3/8" Barb Plug, (1) 3/8" x 3/8" Barb Coupler, (4") of 3/8" Clear Tubing and Silicon sealer usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I...MSRP: $19.99$14.99 -
Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP
MSRP: $17.99$11.99This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air...MSRP: $17.99$11.99 -
Dynasty Pump Barb Bleeder Connect Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings
MSRP: $34.99$24.99This kit is a Set of (2) Air Bleeder barbed plugs,(2) 3/8" x 3/8" Barb couplers, (2) 4" long pieces of 3/8" Tubing and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up...MSRP: $34.99$24.99 -
Dynasty Pump Barb Bleeder Base Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings
MSRP: $16.99$13.99This kit is a Set of (2) Air Bleeder barbed plugs and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the...MSRP: $16.99$13.99 -
Out of stock
LX Intertek 56Fr Motor Thru Bolt, 10-32 x 10-3/4" Long x 1-5/8" thread, 5/16" Head, Used Only
MSRP: $9.99$7.99This thru-bolt is 10-32 threads and 10-3/4" Long and has a 5/16" Bolt head.. It fits some Intertek Guangdong LX 56fr motors only.. Motor Brand Intertek Guangdong LX 56frMotor Parts Type Thru-BoltPart...MSRP: $9.99$7.99 -
Watkins Hot Spring Impeller & Seal Kit XP2 2.5 HP 2 1/8" Eye Vendor # 4081, Wavemaster ,9000, 9200
MSRP: $58.99$48.99This is a Watkins Wavemaster 9000 or 9200 2.5HP Seal Kit & Impeller with a 2 1/8" Eye Width. This Impeller fits between the Face and the Volute of a XP2 Wet End found on some Watkins Hot Spring Caldera pumps with Vendor Code 4081...MSRP: $58.99$48.99 -
Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame
MSRP: $79.99$53.99This part is a Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame found in some Sundance or Jacuzzi Hot Tubs.For the motor that is used with this bracket click this link: Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A,...MSRP: $79.99$53.99 -
Pump Air Bleeder 1/4" Mpt X 3/8" Barb with Sealer Fitting Dimension One
MSRP: $29.99$19.99You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...MSRP: $29.99$19.99 -
PUMP MOUNTING BRACKET FOR: 48 FRAME NPMM Pump, Jacuzzi / Sundance, Baseless, TheraFlo,
MSRP: $78.99$61.99This part is a PUMP MOUNTING BRACKET FOR: 48 FRAME NPMM Pump, Jacuzzi / Sundance, Baseless, TheraFlo, . Note: This will Only Work in Jacuzzi and Sundance Hot Tubs that have a removable base and also use to rotate mote at a 45 degree angle. DO NOT...MSRP: $78.99$61.99