Jet Parts

This part is a Replacement Diffuser for a 5" Pentair Cyclone Jet made by Pentair.  See the video for information on how to change the diffuser and how to determine whether you need a Waterway or Pentair Diffuser the jets look a...

This kit is a (3) Piece O-Ring Set for the Old or New Style Adjustable Mini Jet Nozzle Inserts made by Waterway.  This kit fits either nozzle hole size. The below picture shows the location of the (1) Large O-ring and The (2) Small o-rings....

This part is a Wall Fitting , Hydro-Air, HAI, 3-Port Butterfly Jet, 3-1/4" Hole Size, White.. Jet Part Type    Wall FittingManufacturer    HydroAir/BalboaModel    3 Port ButterflyHole Size  ...

This part is a Wall Fitting, Hydro Air, HAI, Magna Series, 2-5/8" Hole Size, White Jet Part Type    Wall FittingManufacturer    HydroAir/BalboaModel    MagnaHole Size    2-5/8"Face...

This part is a Jet Face, Center Nozzle and Nylon Bushing, 1-3/4", HydroAir, Duo Blaster, 5 Scallop, Black..   Jet Part Type    4 Part KitManufacturer    HydroAirModel    Duo BlasterFace...

This part is a Jet Face, Center Nozzle and Nylon Bushing, 1-3/4", HydroAir, Duo Blaster, 5 Scallop, Silver..   Jet Part Type    4 Part KitManufacturer    HydroAirModel    Duo BlasterFace...

This part is a 3 part Jet Internal, G & G Micro Pulse, 1-5/8" face diameter,  Twin Roto, Smooth, Black... Note: This part is New Old Stock so they can have some light scratces on the surface.. Installation Type Thread In Face...

This part is a 3 part Jet Internal, G & G Micro Pulse, 1-5/8" face diameter,  Twin Roto, Smooth, White... Note: These jets are new old stock and will not be perfect or bright white.. Installation Type Thread In Face...

This part is a 3 11/16" ID Gasket for a Pentair, Cyclone Jet Body for 4 3/4" Wide Face Jet Body..   Part Type Gasket Jet Part Type Gasket/O-Ring Manufacturer Balboa Water Group Model Cyclone Inside...

Wall Fitting , Pentair, Diverter Jet, 3-Port, Flange Below is a link to the parts that this flange fits.. Diverter Jet Internal, Pentair 3 Port Diverter, 4-5/8", Face Diameter, Directional, Gray Wall Fitting Gasket, BWG/Pent Diverter Jet, 3-Port,...

You are buying an Old Style Adjustable Mini Jet Nozzle Insert Tool made by Waterway. This tool fits into the groves of the Nozzle fits behind a Waterway Old style back neck jet with the 4 prongs that fit into the Nozzle. These jets are removed by...

This part is a Jet body that is used with HydroAir Fixed 1 1/2" Wide Face Bullet or Ozone Style Jets...Rated at 3-4 gpm and requires a 3/4" hole in the shell.. The pipe connection is 1/2" which measures about 3/4" OD... For Jet Faces used with this body...