Heater Elements

Female quick disconnect for Balboa plug and click heaters. This 6" adapter connects to the heater terminals on your circuit board and then plugs into the male 25263 adapter from your heater on the new Balboa VS, GS and EL circuit boards. Also makes a...

Male quick disconnect for Balboa plug and click heaters. This 16" adapter will connect to your heater element terminals and will either plug directly into the circuit board on BP systems or into the 25696 female adapter on the new Balboa VS, GS and EL...

Low Flow heater element in 4.0 KW for use with the Applied Computer Controls (ACC) ePack systems with the low flow circ pump option. This durable element is made specifically for the low flow environment and can handle higher temps without failure...

This Kit is a 2" Heater Union, Slice Valve, Spin Kit with Glue To Plumbing Connect Kit found in many Hot Tubs. The Heater Union which measures about 3" outside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it...

This Kit is a 2" Heater Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Heater Union which measures about 3" outside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it...

This part is a Single of Jumper Wire that would go from a standard heater element Electrode Tab to the board Relay Spade Connector.. Loop for the heater side to female spade.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board...

This part is a Set of Jumper Wires that would go from a standard heater element Electrode Tab to the board Relay Spade Connector.. Loop for the heater side to female spade.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board...

This is a 1-1/4"npt Plug Element that is 9 3/4" long and it threads into a fitting in the plumbing.. With 10-32 thd studs, dual 5/16" thermowells, predrilled holes for mounting junction box 1-1/4" threaded elements measure 1-1/2" outside diameter.....

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater   This part is a single Jumper Strap to connect the heater to the circuit board on Balboa B2DG and B240 Systems. Requires two per...

This part is a Set of 4" Jumper Wires that would go from a standard heater element Electrode Tab to the board bolts.. These can be used on 4.0kw to 5.5kw elements to transfer voltage from the circuit board to your heater. Uses a 10 gauge wire...

This part is a 4.0KW Titanium (Best) Heater Element.  This Heater Element features the bend in the back of the element needed to fit the Balboa M-7 heater tubes and has the standard 1-1/4" spacing between the element terminals, center to center...

The Spa Guy is talking here about the ins and outs of wiring a GFCI Breaker. Please consult your local codes for actual wiring rules...  #sparepair #hottubrepair  #hottubhowto Save