Filters, Replacement Cartridges

This Filter cartridge is 5 5/16" Wide X 10 1/8" Tall.. It has a 2 1/8" hole on the top and bottom... it is 45 Sq Ft and is found in a lot of different brands... # 1764, Leisure Bay or Recreation Warehouse, Rec Warehouse,...

This Water Wand Filter Cartridge Cleaner is used along with a standard Garden hose to clean your filter pleats.. You simply attach it to a water hose and remove the filter from the tub and wash the filter please from top to bottom in a vertical...

This Filter is a 40 Square Foot Filter Cartridge that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter of the threads. SAE Threads are really thick. This...

50 Sq Ft filter cartriridge used industry wide but common in Jacuzzi whirlpool models that had a front load skimmer. Can also be found in Clearwater spas various models. This filter has a closed top and a 2-1/8 hole on the bottom that fits over a nipple...

This part is a Filter for Rainbow Pentair Predator-II-Mini (172212x) 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes..

This part is a Sundance or Jacuzzi, Hold Down: Filter Hook Assembly This part locks on the closed crown side of the filter to hold it in place while the open end is open locked into place by a thread nut..  For the filters and parts that...

This part is a Sundance Jacuzzi, Filter Suction Adapter Fitting, 2" MPT, Filter Pipe w/ Jam Nut.. This part threads into the wall of the hot tub and you slip the open hole end of the filter over this part then lock the crown side of the filter into...

This filter fits some Jacuzzi Premium J-460 and J-465 Filter Cartridge, 4-3/4" Wide X 8" Tall 2" and Features a 2" SAE which is a Thick Thread and measures a hair less than 2" Inside diameter and measures 2 3/8" to the outside of the threads...

This filter fits some Jacuzzi Premium J-400 Series Hot Tubs. It is 12 1/2" Tall and 4 3/4" Around and Features a 2" SAE which is a Thick Thread and measures a hair less than 2" Inside diameter and measures 2 3/8" to the outside of the threads.  In...

This part is a Jacuzzi Premium J-400 Series Filter Bag, Pro Polish Mesh, 5".. Note: This bag can be cleaned and reused many times for up to 2 years on average..    Jacuzzi replacement filter bag for J-400 series hot tubs. This...

This part is a Cartridge Filter 5 3/4 to 6" Tall x 8" Wide 2" Male SAE thread  50sqft found in some Bullfrog Hot Tubs.  This filter has a threaded nipple that would measure about 2 3/8" Across the threads. The threaded adapter...

This part is a Cartridge Filter 8" x 7" Wide 2" male pipe thread  32sqft found in some Artesian, Coleman or Maax Hot Tubs. This filter is 8" long x 7 " Wide. This filter has a threaded nipple that would measure about 2 3/8"...