Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536

(No reviews yet) Write a Review
SKU:
ASPWE-48WUABKEa
Shipping:
Calculated at Checkout
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
  • Replacement Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2", Vendor Code 3536
MSRP: $129.99
$104.99
— You save $25.00

Description

This Replacement LX Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2" only that would be about 8.0 Amps at 230V Vendor Code 3536..

 It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4 13/16" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. 

NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange! If your Pump does not have Vendor Code 3536 then this wet end is not correct.. 

If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..

 

 

img-0842-clipped-rev-1.pngimg-0877-clipped-rev-1.pngimg-0847-clipped-rev-1.png

 

Click this link for the new Style Bleeder Barbs There are Three possible barb sizes on these pumps:

 
 
 
 
To Install this wet end you will have to loosen the thru bolts and unscrew the impeller. There are time where you will have to disassemble the motor in order to loosen the impeller because they get stuck when they leak. 
Note: We offer parts for this wet end and complete pumps in our store. 
 
 
Please note: When you have a seal leaking in most cases you will need an impeller because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impellor. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
WUA200-II,WUA300-II,WUA400-II,WUA200-I,WUA300-I,WUA400-I,LP200,LP250,LP300,LP150,WP200-II,WP250-II,WP300-II,WP200-I,wp250-I,wp300-I,wp400-I
WUA200,WUA300,WUA400,WUA200,WUA300,WUA400,LP200,LP250,LP300,LP150,WP200,WP250,WP300,WP200,wp250,wp300,wp400,chinese,lx,guangdong,energy saver spa equipment
 
View AllClose

Related Products