Watkins Hotspring Caldera Impellers & Parts

This Replacement LX Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2" only that would be about 8.0 Amps at 230V Vendor Code 3536..  It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top...

This Item is a seal for the LX Hot Tub pump with the part number 1431501-03. It may have a Vendor Code 3536 on the LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version. NOTE: Do Not purchase this for any...

This part is a Stronger Pump Bleeder Barb that fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Npt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines....

This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

This kit fit 39583-03 Vendor Code 3536 1.5HP Impeller, Seal, Silicon and Seal Installation Tool that fits 48 Frame Pump Wet Ends manufactured by Intertek LX Brand only.  NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do...

Watkins Vendor Code 4081 6.1" or 6.3"and XP2e WaveMaster Pump Face O-Ring fits around the Face of a 4081 Pump Face exclusively for An Wavemaster Xp2 pump which has 2" inlet and outlet which measures about 3" across the threads... There are (2) Different...

This is an Aqua-Flo 39577 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some pumps with Vendor Code 4081. Impeller Type   Closed Face Impeller Diameter...

This LX 1019801-03 or 39577-03 Vendor Code 3536 2HP Impeller that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to the tip of the...

This Vendor Code 3536 2.5 Horse Power Impeller, Seal, Silicon & Seal Installation Tool that fits a 56 Frame Pump Wet Ends manufactured by Intertek with numbers 39578-03, 37066-03 or 0982601-03 only.  See NOTES Below... Watch the video...

This part is a Pump Bleeder Barb fit some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...

This Kit fits a 1019801-03 or 39577-03 Vendor Code 3536 LX 2 HP Pump and Includes an Impeller, Seal, Bearing, Silicon and Seal Installation Tool... It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to the...

This part is a Pump Bleeder Barb fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Mpt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...