1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

 1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

The FMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge version where the Pressure output is in the dead center of the top of the wet end..

The FMHP Wet End is a 48fr 1 1/2" x 1 1/2" Side discharge version where the Pressure output is on the right side offset of the wet end..

The FMVP Wet End is a 48fr 1 1/2" x 1 1/2" Adjustable Side discharge version where the Pressure Side fitting can be turned in any position at 12, 3, 6, 9O'Clock position but much different that the other wet ends and pump this version is mounted Vertically with the wet end facing and mounted to the floor of the tub...

The TMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge Version of a Wet End where the face place has a 100% drain back feature built in to try to keep the water from sitting in the wet end when not in used and building up the black crud that you get when water sits stagnant in the plumbing.. Although it has this feature if the garden tub is not plumbed with the pipes between the jets where they self drain as well there is no way to prevent this black crud from building up except to clean the tub and run it often.. The special face plate also allows the pump to self prime when you fill it up when you want to use it which is much different that a traditional hot tub where it stays filled and hot except when you drain and clean it 2-4 times a year.. A Garden tub has to be cleaned after use and at least weekly to stop the crud build up...     

 

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Circ-Master, Pump, Wet End, Aqua-Flo, CMHP, 1/15th , 1-1/2", 48 frame, 0.6A/230V, 1.3A/115v 
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”! Circ-Master, Pump, Wet End, Aqua-Flo, CMHP, 1/15th , 1-1/2", 48 frame, 0.6A/230V, 1.3A/115v 
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!

    Circ-Master, Pump, Wet End, Aqua-Flo, CMHP, 1/15th , 1-1/2", 48 frame, 0.6A/230V, 1.3A/115v

    MSRP: $127.99
    $104.99
    This part is a Complete CMHP 1/15th HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for CMHP pumps. This wet end is used with a 48 frame motor that would have about .6 Amps on High Speed on a...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Wet End, Aqua-Flo, FMHP, 0.75HP, 1-1/2", 48 frame, 7.0A/230V, 10-11A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”! Wet End, Aqua-Flo, FMHP, 0.75HP, 1-1/2", 48 frame, 7.0A/230V, 10-11A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!

    Wet End, Aqua-Flo, FMHP, 0.75HP, 1-1/2", 48 frame, 7.0A/230V, 10-11A/115v

    MSRP: $127.99
    $104.99
    This part is a Complete FMHP .75HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 7.0 Amps on High Speed on a 230V...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Wet End,  Aqua-Flo, FMCP, 1.0HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP Wet End,  Aqua-Flo, FMCP, 1.0HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP
The Thru-Bolts are about 5 1/4" apart in a cross pattern and 3 5/8" Side to Side....

    Wet End, Aqua-Flo, FMCP, 1.0HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP

    MSRP: $127.99
    $104.99
    This part is a Complete Flo-Master FMCP 1HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Wet End,  Aqua-Flo, FMCP, 1.5HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP Wet End,  Aqua-Flo, FMCP, 1.5HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!

    Wet End, Aqua-Flo, FMCP, 1.5HP, 1-1/2"mbt, 48 frame Flo-Master Series, TMCP

    MSRP: $127.99
    $104.99
    This part is a Complete Flo-Master FMCP 1.5HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Wet End, Aqua-Flo, FMHP, 1.0HP, 1-1/2", 48 frame, 8.0A/230V, 12A/115v Wet End, Aqua-Flo, FMHP, 1.0HP, 1-1/2", 48 frame, 8.0A/230V, 12A/115v

    Wet End, Aqua-Flo, FMHP, 1.0HP, 1-1/2", 48 frame, 8.0A/230V, 12A/115v

    MSRP: $127.99
    $104.99
    This part is a Complete FMHP 1.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High Speed on a 230V...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Wet End, Aqua-Flo, FMHP, 2.0HP, 1-1/2", 48 frame, 10.0A/230V, 16A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!
This is a 48 Frame Wet End and the Thru-Bolts are about 5 1/4" apart in a cross pattern and 3 5/8" Side to Side....Also the bolt heads on the thru-bolts are 1/4" on a 48 frame motor..IF your bolt heads are 5/16" you have a 56fr motor and this wet end will not work.. Wet End, Aqua-Flo, FMHP, 2.0HP, 1-1/2", 48 frame, 10.0A/230V, 16A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!

    Wet End, Aqua-Flo, FMHP, 2.0HP, 1-1/2", 48 frame, 10.0A/230V, 16A/115v

    MSRP: $127.99
    $104.99
    This part is a Complete FMHP 2.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 10.0 Amps on High Speed on a...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Wet End, Aqua-Flo, FMHP, 1.5HP, 1-1/2", 48 frame, 9.0A/230V, 14A/115v Wet End, Aqua-Flo, FMHP, 1.5HP, 1-1/2", 48 frame, 9.0A/230V, 14A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!

    Wet End, Aqua-Flo, FMHP, 1.5HP, 1-1/2", 48 frame, 9.0A/230V, 14A/115v

    MSRP: $127.99
    $104.99
    This part is a Complete FMHP 1.5HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High Speed on a 230V...
    MSRP: $127.99
    $104.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $127.99
    $104.99
    Subtotal:
  • Total: items /

Adding your products to cart