1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

 1 1/2" Aqua-Flo Wet Ends FMCP FMHP FMVP TMCP

The FMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge version where the Pressure output is in the dead center of the top of the wet end..

The FMHP Wet End is a 48fr 1 1/2" x 1 1/2" Side discharge version where the Pressure output is on the right side offset of the wet end..

The FMVP Wet End is a 48fr 1 1/2" x 1 1/2" Adjustable Side discharge version where the Pressure Side fitting can be turned in any position at 12, 3, 6, 9O'Clock position but much different that the other wet ends and pump this version is mounted Vertically with the wet end facing and mounted to the floor of the tub...

The TMCP Wet End is a 48fr 1 1/2" x 1 1/2" Center discharge Version of a Wet End where the face place has a 100% drain back feature built in to try to keep the water from sitting in the wet end when not in used and building up the black crud that you get when water sits stagnant in the plumbing.. Although it has this feature if the garden tub is not plumbed with the pipes between the jets where they self drain as well there is no way to prevent this black crud from building up except to clean the tub and run it often.. The special face plate also allows the pump to self prime when you fill it up when you want to use it which is much different that a traditional hot tub where it stays filled and hot except when you drain and clean it 2-4 times a year.. A Garden tub has to be cleaned after use and at least weekly to stop the crud build up...     

 

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Wet End, Aqua-Flo, FMVP, 1.0HP, 1-1/2", 48 frame, 10-11A/115v
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!
Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done... Wet End, Aqua-Flo, FMVP, 1.0HP, 1-1/2", 48 frame, 10-11A/115v Verticle Mount Pump 
The Suction and Pressure sides both Measure about 2-3/8" Across the threads and is called 1 ½”!
Also the suction side of this wet end can be used in any position you simply unscrew the four bolts in the front and turn it and tighten the bolts back in and you are done... Note: This is not a Circulation pump wet end it is only for Jet pumps with 10.0Amps or more on high speed at 115V...

    Wet End, Aqua-Flo, FMVP, 1.0HP, 1-1/2", 48 frame, 10-11A/115v

    MSRP: $249.99
    $189.99
    This part is a Complete Verticle Mount Style FMVP 1.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Adjustable Suction Side discharge 48 frame wet end for FMVP pumps only. This wet end is used with a 48 frame motor that...
    MSRP: $249.99
    $189.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $249.99
    $189.99
    Subtotal:
  • Total: items /

Adding your products to cart