Waterway 56 Frame Pumps

Waterway 56 Frame Pumps

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
 
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP. 
   8.0 = .5 HP 
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
 
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
 
screen-shot-2015-10-27-at-12.56.04-pm.jpg
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • This Pump is a 2 1/2" x 2" which is only found in a few hot tubs like Catalina, Some Leisure Bay, Dynasty and a few others. Measure the intake and pressure side threads and match them up before ordering. Pump Waterway Executive 2.0hp 230v 2-spd 56fr 2 1/2" X 2" 8 Amp, OEM Note: Do Not Purchase a pump based on a HP Sticker compare the Amperage to the chart. See the sticker below for an example of where to find amperage. This Pump is a 2 1/2" x 2" which is only found in a few hot tubs like Catalina, Some Leisure Bay, Dynasty and a few others. Measure the intake and pressure side threads and match them up before ordering. Pump Waterway Executive 2.0hp 230v 2-spd 56fr 2 1/2" X 2" 8 Amp, OEM Note: Do Not Purchase a pump based on a HP Sticker compare the Amperage to the chart. See the sticker below for an example of where to find amperage.

    Pump Waterway Executive 2.0hp 230v 2-spd 56fr 2 1/2" X 2" 8 Amp

    MSRP: $659.99
    $479.99
    This Listing is for a Waterway Executive 56fr 2 Speed 230V 1 HP 2 1/2" X 2" Pump. Your sticker may say 2HP but based on the chart it is really a 1HP at 8 Amps. This Pump is a 2 1/2" x 2" which is only found in a few hot tubs like Catalina, Some Leisure...
    MSRP: $659.99
    $479.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $659.99
    $479.99
    Subtotal:
  • Pump, Waterway, EX2, 2.5hp, 230v, 2-spd, 56fr, 10.0A, 2"
This pump is the Waterway Version of an Aqua-Flo XP2 or XP2E.. It is an exact replacement for the Aqua-Flo Xp2e 56fr pump.. Pump, Waterway, EX2, 2.5hp, 230v, 2-spd, 56fr, 10.0A, 2"
This pump is the Waterway Version of an Aqua-Flo XP2 or XP2E.. It is an exact replacement for the Aqua-Flo Xp2e 56fr pump..

    Pump, Waterway, EX2, 2.5hp, 230v, 2-spd, 56fr, 10.0A, 2"

    MSRP: $586.99
    $449.99
    This pump is the Waterway Version of an Aqua-Flo XP2 or XP2E.. It is an exact replacement for the Aqua-Flo Xp2e 56fr pump.. Voltage 230V, 60Hz High speed 10 Amps, low speed 3.5 Amps Competitive power 3.5 HP, input power 3.08 HP, output power...
    MSRP: $586.99
    $449.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $586.99
    $449.99
    Subtotal:
  • Pump, Waterway Viper, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2-1/2"", OEM
The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16".. Pump, Waterway Viper, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2-1/2"", OEM

    Pump, Waterway Viper, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2-1/2"", OEM

    MSRP: $689.99
    $539.99
    This pump is a rated 5HP Viper 2 1/2" x 2 1/2" 56 Frame Spa Pump... The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16"..  It is an unusual pump not found in most hot tubs.. It is...
    MSRP: $689.99
    $539.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $689.99
    $539.99
    Subtotal:
  • Pump, Waterway Viper, 4.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2-1/2"", OEM
The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16".. Pump, Waterway Viper, 4.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2-1/2"", OEM

    Pump, Waterway Viper, 4.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2-1/2"", OEM

    MSRP: $689.99
    $539.99
    This pump is a rated 4HP Viper 2 1/2" x 2 1/2" 56 Frame Spa Pump... The measurement from the edge of the thread to the edge of the thread on the Suction and Pressure side is 3 11/16"..  It is an unusual pump not found in most hot tubs.. It is...
    MSRP: $689.99
    $539.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $689.99
    $539.99
    Subtotal:
  • This Pump is a 2 1/2" x 2" which is only found in a few hot tubs like Catalina, Some Leisure Bay, Dynasty and a few others. Measure the intake and pressure side threads and match them up before ordering. WW Exec, 3.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM Note: Do Not Purchase a pump based on a HP Sticker compare the Amperage to the chart. See the sticker below for an example of where to find amperage. This pump features a 2 1/2" Suction fitting that measures about 3 5/8" across the the threads and the pressure side 2" measures about 3" across the threads. Pump, WW Exec, 3.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM

    Pump Waterway Executive 3.0hp 230v 2-spd 56fr 2 1/2" X 2" 12 Amp

    MSRP: $659.99
    $479.99
    This Listing is for a Waterway Executive 56fr 2 Speed 230V 2 HP 2 1/2" X 2" Pump. Your sticker may say 3HP but based on the chart it is really a 2HP at 10 Amps. This pump is 12 Amps.. Motor Voltage 230v Speed 2 Speed (2-Spd) Motor...
    MSRP: $659.99
    $479.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $659.99
    $479.99
    Subtotal:
  • Pump, Waterway, Executive, 3.0hp, 230v, 1 Speed, 56fr, 2", 12 Amps This pump features a 2" Suction fitting that measures about 3" across the the threads and the 2" pressure side measures about 3" across the threads.
Pump, Waterway, Exececutive, 3.0hp, 230v, 1 Speed, 56fr, 2", 12 Amps

    Pump, Waterway, Executive, 3.0hp, 230v, 1 Speed, 56fr, 2", 12 Amps

    MSRP: $688.99
    $449.99
    This Listing is for a (1) Speed Waterway Executive 56fr 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. Measure the intake and pressure side threads and match them up before ordering.  This...
    MSRP: $688.99
    $449.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $688.99
    $449.99
    Subtotal:
  • Pump, Waterway Executive, 1.0hp, 230v, 2-spd, 56fr, 2", 8.0 Amp Pump Waterway Executive True 1.0hp 230v 2-spd 56fr 2" 8.0 Amp Note: Do Not Purchase a pump based on a HP Sticker compare the Amperage to the chart. See the sticker below for an example of where to find amperage.

    Pump, Waterway Executive, 1.0hp, 230v, 2-spd, 56fr, 2" x 2" , 8.0 Amp

    MSRP: $626.99
    $439.99
    This Listing is for a Waterway Executive 56fr 2 Speed 230V 1 HP 2" X 2" Pump. Your sticker may say 2HP but based on the chart it is really a 1HP at 8 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...
    MSRP: $626.99
    $439.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $626.99
    $439.99
    Subtotal:
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM
This is an unusual pump meaning the suction side is called 2 1/2" and measures about 3 5/8" Across the threads and the Pressure Side is 2" and measures about 3" across the threads.. The Suction Side of this pump measures about 3 5/8" Across the threads and is called 2 ½”..

    Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM

    MSRP: $803.99
    $529.99
    This pump is a Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2", OEM This is an unusual pump meaning the suction side is called 2 1/2" and measures about 3 5/8" Across the threads and the Pressure Side is 2" and measures about 3"...
    MSRP: $803.99
    $529.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $803.99
    $529.99
    Subtotal:
  • Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2" The Suction Side of this pump measures about 3" Across the threads..

    Pump, Waterway Executive, 5.0hp, 230v, 2-spd, 56 frame, 2" X 2"

    MSRP: $639.99
    $515.99
    This Listing is for a Waterway Executive 16.4 Amp 56fr 2 Speed 230V 5 HP 2" X 2" Pump. Your sticker may say 5-6HP. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to the 3, 6, or 9 O'clock position and a...
    MSRP: $639.99
    $515.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $639.99
    $515.99
    Subtotal:
  • Pump, Waterway Executive, 4.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2" This is the suction side that is called 2 1/2" about 3 5/8" edge to edge across the threads...

    Pump, Waterway Executive, 4.0hp, 230v, 2-spd, 56fr, 2-1/2" x 2"

    MSRP: $544.99
    $499.99
    This Listing is for a Waterway Executive 56fr 2 Speed 230V 3 HP 2 1/2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. This unit features a 2 1/2" X 2" Executive Wet End that can be moved from the 12 O'clock...
    MSRP: $544.99
    $499.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $544.99
    $499.99
    Subtotal:
  • Pump Waterway, Executive, 2.0hp, 230v, 2-spd ,56fr, 2" x 2", 10 Amp This pump features a 2" Suction fitting that measures about 3" across the the threads and the 2" pressure side measures about 3" across the threads.

    Pump Waterway, Executive, 2.0hp, 230v, 2-spd ,56fr, 2" x 2", 10 Amp

    MSRP: $659.99
    $449.99
    This Listing is for a Waterway Executive 56fr 2 Speed 230V 2 HP 2" X 2" Pump. Your sticker may say 3HP but based on the chart it is really a 2HP at 10 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position...
    MSRP: $659.99
    $449.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $659.99
    $449.99
    Subtotal:
  • Pump Waterway Executive True 3.0hp 230v 2-spd 56fr 2" 12 Amp
Note: Do Not Purchase a pump based on a HP Sticker compare the Amperage to the chart. See the sticker below for an example of where to find amperage. This is an example of a pump motor sticker showing the Amperage and you determine your pumps HP by the Amperage not what is written on the motor sticker.

    Pump Waterway Executive 3.0hp 230v 2-spd 56fr 2" 12 Amp, Called 4.0HP

    MSRP: $713.99
    $449.99
    This Listing is for a Waterway Executive 56fr 2 Speed 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. This unit features a 2" X 2" Executive Wet End that can be moved from the 12 O'clock position to...
    MSRP: $713.99
    $449.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $713.99
    $449.99
    Subtotal:
  • Total: items /

Adding your products to cart