Water Manifold Singles and Related Parts
This Category features Hot Tub Water Single Manifolds and Related Parts. These parts go between the Pumps and the jets in your Hot Tub and distribute the water from the pumps to the jets. The older tubs generally had glue in style maniofld meaning the hoses to the manifolds from the pumps glued in and the hoses from the manifold to the jet bodies where glued in. The more modern hot tubs still glue in from the pump side but most use barbs from the manifolds to the jet bodies with clear hose and clamps. The beauty of the new style is the virtual elimination of long term leaks and the ease of replacement if you have a problem like freeze damage. Kepp in mind when searching that you can replace the old style with the new style by ieht er gluing and clamping the clear tube from the manifolds over the old white pipe going to your jets if it is 1/2" (which would mearue 3/4" O.D. or by gluing in conversion barbs that would accpet 3/4" or 1" pipe and convert them to 3/4" Barbs where you would plumb from the the new manifold with clear tube to the old white flex pipe virutally eliminating the possibilty of future leaks. If you choose the old style manifolds and glue the old pipe back into them they will leak almost every time because the white flex pipe has shrunk up over the years and that is ptobably what caused the leaks in the first place on the glue in the old style manifolds. Feel free to contact us if you have questions about how to convert the old system to the new system. The Glue in fittings from the pump to themanioflds are normally 1 1/2" or 2" and rarely leak it is ususlly the smaller sizies that are on the pressure side that leak when the glued in style was used. To figure out what size manifold you need look at the shart below for size conversions.
Note: When gluing New Valves to old plumbing you need to "Spin It To Win It" so you don't have any leaks so watch the video on glue techniques. Please don't be a drip, "Spin It To Win It"
This is a chart for the outside of your plumbing pipes so you can figure out what size parts to order. Note: The actual size a part is called is not the actual size of the hole in the part it is really the Inside Diameter of the pipe that would glue into that part which doesn’t make sense, since you cannot see inside the pipe. Therefore I am giving you the measurements of the outside of the pipe so you know what size part to order. For example a part that is ½” plumbing would glue into would actually measure ¾” inside the hole of the part and on the outside of the pipe that glues into the part.
Pipe Outside Diameter chart:
½” Outside Diameter is ¾”
¾” Outside Diameter is 1”
1” Outside Diameter is 1 ¼”
I have never seen 1 ¼” in Hot Tubs
1 ½” Outside Diameter is 1 â…ž”
2” Outside Diameter is 2 â…ś”
2 ½” Outside Diameter is 2 â…ž”
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
PVC Leak Loc Low Voc Hot Blue Glue 8oz for Hot Tub Spa PCV Plumbing Repair
MSRP: $23.99$18.99This part is Leak Loc One-Step Blue Glue! This Item is (1) 1/2 Pint or 8OZ of Hot Blue Glue and no Purple Primer is needed with this glue. The size glue is used for small jobs (2-4 Manifolds)to Glue PVC Plumbing Parts...MSRP: $23.99$18.99 -
Hoss Manifold, Hot Tub, Spa Part, 2" slip x End x (7) 3/4" Dead End Water
MSRP: $25.99$19.99This part is a Hoss 2" Slip X Dead End X (7) 3/4" Barbs manifold and a single barb plug The Manifold receives a 2" pipe on one side and then is a Dead End with (1) 3/4" Barb on the end with (6) 3/4" Barb...MSRP: $25.99$19.99 -
3/4" Tubing Barb Connect Kit with Glue, 3/4" x 3/4" Smooth Barb with Clamps and Tubing
MSRP: $28.99$23.99This Kit is a Barb Coupler, Glue, Tubing and Clamps.. Kit includes (1) 3/4" x 3/4" Smooth Barb with 6" of 3/4"ID Tubing and (2) 3/4" Roto Clamps used to extend a 3/4" tube to Barb connection..MSRP: $28.99$23.99 -
Spin To Win, Glue Kit, 3/4" Flex Pipe, 1" OD, 6" length for Manifolds and Waterfall or Air Control Valves
MSRP: $28.99$22.99This Kit is a 3/4" Spin To Win Glue Kit for 3/4" Plumbing repairs where you are connecting old 3/4" Plumbing that measures about 1" OD to new plumbing.. The kit includes a 6" Piece of 3/4" Flex Pipe that measures about 1" OD and a 3/4" Coupler and (1)...MSRP: $28.99$22.99 -
Barb Adapter, 3/4" Barb x 2" Spigot to 3/4" x 3/4" Barb Kit, Fits 2" Slip Water Manifolds
MSRP: $28.99$19.99This Kit is a Barb Adapter, 3/4" Barb x 2" Spigot to 3/4" X 3/4" Barb Coupler Kit, Fits 2" Slip Water Manifolds that features (2) Clamps, 4" 3/4" ID Tubing and (1) 3/4" x 3/4" Barb coupler.. that will glue inside of a 2" Slip Manifold or other...MSRP: $28.99$19.99 -
Manifold, 3/8" Barb, 6 Port, Flow Thru, 1-1/2"s x 1-1/2"spg
MSRP: $24.99$18.99This part is a Manifold that features (6) 3/8" Barbs and is Flow Thru, 1-1/2"slip x 1-1/2"spigot.. To plug the barbs you can use these plugs: Barb Plug 3/8" Slip for Air Manifold and more Waterway Set of (3) Barb Plugs 3/8" Slip for Air Manifold and...MSRP: $24.99$18.99 -
Spin To Win, Glue Kit, 1/2" Flex Pipe, 3/4" OD, 6" length for Manifolds and Waterfall or Air Control Valves
MSRP: $28.99$22.99This Kit is a 1/2" Spin To Win Glue Kit for 1/2" Plumbing repairs where you are connecting old 1/2" Plumbing that measures about 3/4" OD to new plumbing.. The kit includes a 6" Piece of 1/2" Flex Pipe that measures about 3/4" OD and a 1/2" Coupler and...MSRP: $28.99$22.99 -
Spin To Win, Glue Kit, 1" Flex Pipe, 1 1/4" OD, 6" length for Manifolds and Waterfall or Air Control Valves
MSRP: $28.99$22.99This Kit is a 1" Spin To Win Glue Kit for 1" Plumbing repairs where you are connecting old 1" Plumbing that measures about 1 1/4" OD to new plumbing.. The kit includes a 6" Piece of 1" Flex Pipe that measures about 1 1/4" OD and a 1" Coupler and (1) 4oz...MSRP: $28.99$22.99 -
PVC Hot Blue Glue and Purple Primer 4oz of Each Hot Tub Spa Video
MSRP: $26.99$20.99This Glue Set is Hot Blue Glue and Purple Primer! This Glue Kit Features (1) 1/4 Pint of Hot Blue Glue and (1) 1/4 Pint of Purple Primer. The kit is used for small jobs (1-2 Manifolds)to Glue PVC Plumbing Parts together. We offer larger...MSRP: $26.99$20.99 -
PVC Red Hot Blue Glue Christy's 8oz for Hot Tub Spa PCV Plumbing Repair Video
MSRP: $24.99$18.99This part is the Hottest PVC Glue Formula Available Today. Christy's Red Hot Blue Glue! This Item is (1) 1/2 Pint of Christy's Red Hot Blue Glue. The size glue is used for Mid Size jobs (3-5 Manifolds)to Glue PVC...MSRP: $24.99$18.99 -
Cal Spa Coleman Spa Kit Hot Tub 2" slip x End x (4) 3/4" Port Video How To
MSRP: $33.99$23.99This kit is a 2" Slip X Dead End X (4) 3/4" Barbs X (1) 3/4" Barb manifold repair kit for freeze damaged Cal Spa or Coleman Spas. The manifolds are found on the left front side of the tub usually and has 4 lines and the drain attached to...MSRP: $33.99$23.99 -
Water Manifold, 2"slip x 2"slip x (6) 3/4" Ports Water Video How To
MSRP: $25.99$19.99This part is a 2" Slip X 2" Slip X (6) 3/4" Barbs manifold and a single barb plug in case you only need 5 barbs instead of 6. The Manifold receives a 2" pipe that measures about 2 3/8" Outside Diameter on the slip side and then...MSRP: $25.99$19.99