Jet Bodies & Jets Complete

This Kit consists of 6" of 1" Inside Diameter Clear Tubing, (1) 4oz BLue Glue (2) Clamps and a 1/2" Coupler.. This Kit is used to convert your 1/2" or 3/4" Jet Body flex pipe connection that is leaking to a more modern outside barb type seal... You...

This part is a Complete Jet Body for Rising Dragon Quantum 5" Face THREAD In Style Jets Only.. This Jet Body features a water connection of a 3/4" Barb and an Air Connection of a 3/8" Barb.. This clear jet body takes the place of the threaded white jet...

This part is a VSR Jet Body Assembly 3/8" Barb X 3/4" Slip 3 1/2" Hole Size.  The Jet Body is for old style VSR style jets only. If you have the new style jet to install you will still have to glue in the retrofit ring..  This is a 3/4" Slip...

This item is a set of (10) Barbed Coupling used to couple 3/8" ID hose together. An example would be the air line on a Pump Bleeder, Jet Body or Air Manifold..   For other 3/8" related items click this...

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing with (1) 3/8" x 3/8" Barbed Coupler and 4oz of Blue Glue.. This kit is used to Connect the 3/4" Barbed...

CMP Pro-Loc 500 Jet Body with a 3/4" Smooth Barbed Water fitting and a 3/8" Smooth Barbed Air Fitting..Fits CMP Pro-Loc 500 5" or 5-1/4" Jets only...  3-3/4" hole size. Supplied with 3/8" nozzle (12gpm @ 12psi)   SQR= Simple /...

This part is obsolete but in some cases this jet body might work.. Make sure you measure the thickness of the shell if it is more than 1/2" Thick this jet body will not work. In some cases you will have to trim the shell out and also trim the lip off of...

This part is obsolete but in some cases this jet body might work.. Make sure you measure the thickness of the shell if it is more than 1/2" Thick this jet body will not work. In some cases you will have to trim the shell out and also trim the lip off of...

This part is a Complete Jet Body for Waterway Power Storm 5" Face THREAD In Style Jets... This Jet Body features a water connection of a 3/4" Barb and an Air Connection of a 3/8" Barb.. This clear jet body takes the place of the threaded white jet body...

This part is a Complete Jet Body for Waterway Power Storm 5" Face Snap In Style Jets... This Jet Body features a water connection of a 3/4" Barb and an Air Connection of a 3/8" Barb.. NOTE: This part has been discontinued by Waterway so stock is...

This item is a Jet Body Kit for a Pentair Cyclone 5" or 6 1/2" Jet that features a 3/8" barbed Air Connection and a 3/4" barb Water Connection... This Kit Includes the Jet Body, Gasket, Nut and Tube of Silicone.. The hole size for the hot tub shell...

This part is a (1) American Products Luxury Jet Body Flange Tool. This Flange that this tools fits has two holes on the front that this tool fits into and the holes are between 2 1/2 and 2 5/8" apart.. The flange fits though a a 2 5/8" Hole in the shell...