Master Spa and Down East Hot Tub Parts

This part is a Filter for Rainbow Pentair Predator-II-Mini (172212x) 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes..

This Black Flat Pillow will perfectly match the rest of your hot tub so you can get back to enjoying your spa. Measurements- Length: 9 1/2 inches x Width: 4 3/8 inches x Depth: 1 1/8 inches (2.54 cm) x Pin Width: 6 1/4 inches Note: There is a similar...

This part is a Master Spa 8" BLASTER OVO SS Master Blaster Jet with Jet Body This Jet is 8" across the Face it depends on how you measure it. It features 14 black nozzles and chrome. Adjustable Master Massage Jet Assembly with L Gasket DSG...

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...

This Kit is a Silicone Kit & Lo-Profile Drain Assembly, 3/4" slip or 1" Street, Gray, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one...

This part is a replacement filter for Dual Filter applications in 2002+ Master Spas and Down East Spas. This filter is found on the inside of a larger filter and uses the stalk system with a center stalk and a threaded cap. You can find these different...

This pillow is a Master Spa Pillow, Oval, Warped Triangle, Charcoal.. Dimensions: Length 9.0 inchesWidth: 5.625 inchesHeight: 1.25 inchesWeight: 2.6 oz. Distance between Pins: 5.25 inches  

This Item is an Eco Pur Filter for the Teleweir System on Master Spa Build tubs.. It is 5" Wide X 3 1/2" Tall on the cartridge and has a 1 1/2" SAE Threaded fitting that measure about 1 7/8" Edge to edge on the threads.. This filters works with some but...

This part is a Halo Style Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve made by Waterway, the plumbing connects are 3/4" Barb x 3/4" Barb Single Port.. To connect the valve to 3/4" plumbing simply glue...

This part is a 3 1/2" Master Spa, Down East or Freedom Spa Jet. This Jet is 3 1/2" across the Face Single. It features a Dual Hole Spinning black nozzle.  ASPX241119

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...