Four Winds Brand Hot Tub Parts

This kit is a Gray Waterfall Valve Connect Kit with 90 and Straight to Connect to Ringlet Style Hose.  You will need glue and you can find it here: PVC Leak Loc Low Voc Hot Blue Glue 4oz for Hot Tub Spa PCV Plumbing Repair   This kit...

This part is a Complete Jet Body for Rising Dragon Quantum 5" Face THREAD In Style Jets Only.. This Jet Body features a water connection of a 3/4" Barb and an Air Connection of a 3/8" Barb.. This clear jet body takes the place of the threaded white jet...

This part is a Filter for Rainbow Pentair Predator-II-Mini (172212x) 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes..

This Black Flat Pillow will perfectly match the rest of your hot tub so you can get back to enjoying your spa. Measurements- Length: 9 1/2 inches x Width: 4 3/8 inches x Depth: 1 1/8 inches (2.54 cm) x Pin Width: 6 1/4 inches Note: There is a similar...

This part is a Hour Glass Pillow Black, Four Winds, Genesys, Cal Spa, Coast Spa  It fits some Cal Spas, Master Spa, Coast, Genesys and Also Four Winds It is 4" Wide in the center and 4 5/8" on the ends and 8" Long at the widest point....

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...

This part is a Balboa 6 Button Overlay for a Topside for a Pump and Aux with Light System. On the overlay starting at the left of the readout it reads Jets, Aux, Light and Warm, Mode, Cool. This Overlay can be used to replace your original Overlay with...

This part is a Balboa 6 Button Overlay for a Topside for a Pump and Blower with Light System. On the overlay starting at the left of the readout it reads Jets, Blower, Light and Warm, Mode, Cool. This Overlay can be used to replace your original Overlay...

This New Old Stock part is a Complete Hot Tub Spa Part Clear 7 5/8" Waterfall Assembly 2 Hole Style Hole size is about 1" each.. You will get (2) 90 degree 1/2' Slip fittings with the waterfall.. If you need this waterfall to be barbed you will need 2...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it on...

This 1" Waterfall Control Plunger and Cap Replacement Kit is found in some 1" Waterfall or Neck Jet Control valves. This kit features the Cap, plunger and stem, The Gasket for the bottom of the plunger and clip that holds the stem inside the cap and an...