Gecko Spa Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA Video

(No reviews yet) Write a Review
SKU:
HTP46-402-2216A
Shipping:
Calculated at Checkout
  • Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA How To Video
  • This heater fits a plastic pack that looks similar to this..
  • If your old board has soldered on tabs like this this heater will not work... Look for the heater with the nuts on the heater connections that looks like this element..
  • Examples of the different board connection types..
  • Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA How To Video
  • Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA How To Video
  • Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA How To Video
  • Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA How To Video
  • Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA How To Video
  • Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA How To Video
  • Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA How To Video
  • Hot Tub S-Class Heater 5.5kw Pressure Switch Gasket SSPA How To Video
MSRP: $259.99
$219.99
— You save $40.00

Description


You are buying a Complete Replacement 5.5KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets. NOTE: If you have the old style SSPA board with the soldered on tabs like you see in the picture above this heater will not work... you need to choose the heater with the nuts on the heater electrodes in our store... I also offer the element only or the tub and element with no pressure switch for this SSPA Pack in our store. Watch the video for more detailed information. NOTE: This listing is for the heater tube, element, Pressure Switch and gaskets only any other parts are for illustration only. We have plenty of these.

 
Watch the video for tips on how to diagnose this part. Normally on this system you will have 3 dots flashing on the topside showing a Flow Code but three dots can also mean a hi limit code if there is a tiny red light lite on the lower right of the board. If it is a hi limit code that means the heater overheated at some point and you cannot clear the three dots with the red light unless you power down and back up. Some of the causes of a hi limit code can be a stuck closed heater relay, a combination of no GFCI Breaker and a hole in the heater element shorting the element to ground and keeping it on, bad board or hi limit sensor.. The causes of 3 dots and no red light which is a Flow Code could be a stopped up filter, pump #1 not operating sometimes or at all, a faulty pressure switch not closing when it has water movement...If all systems are working with no 3 dots code but no heat you would verify incoming voltage, proper voltage to the heater and then test the heater to see if it is open... Thanks, Spa Guy 
sspa,s-spa,gecko,s-class,scales,s class,heater, element, pressure switch,3 dots, flow code, flo code,9920-100338,9920-100339,spa builders, dynasty, nordic,pack,control,plastic, 
View AllClose

Related Products