Flow Thru Element, 3.0kW, Incoloy, 10", 115v or 230v

(No reviews yet) Write a Review
SKU:
HTP47-555-LE77
Shipping:
Calculated at Checkout
MSRP: $64.99
$49.99
— You save $15.00

Description

This part is a Standard 3.0KW Heater Element 115v or 230V that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes.

This also fits Gecko, ACC, and most other standard Hot Tub Heater Tubes.  

This part used in newer hot tubs and features.

 

Note: When testing this heater if it trips the breaker simply unplug it and if the breaker stays on plug back in and if it trips this heater is the cause if it is not a breaker trip issue then measure between the two terminals with an Ohm meter it should measure about 14.5K ohms. If it measures 0K it is open. If it is not tripping the breaker and doesn't measure open then the heater is not bad look for other issues that cause no heat Like a Pressure Switch, Stopped up filter, No water movement, Open circuit on board etc…..
View AllClose