Electronic Control Systems and Parts

HydroQuip Temperature Sensor, 72" with 1/4" diameter temp probe. Common to find these used on the Versi Heaters and 9700 series spa controls. Please Note: This 2 wire sensor will replace all previous 3 wire styles. For SSPA, USPA, MP, 6200, 9200, 6500,...

Popular plastic presssure switch for use with many brands of hot tubs and spas. Common to find thsi switch on Cal Spas and some ACC control systems. Comes preset at 1.5 psi but is field adjustable from 1-11 psi. Be sure to add teflon tape to your threads...

This part is a Amp Cord, Pump 1, 2-Speed, 4-Pin Amp, 14/4, 72"Long, Plug Attached, w/Terminated Ends. The Wire colors are as follow on most systems: Red=High Speed Black=Low Speed White=Neutral or Common Green=Ground There are exceptions to these colors...

This part is a  New Style Sensor, Hi-Limit (Kit) Watkins, Hot Spot/Solana, Bulb Style w/2 Pin JST Plug, Hold Down Clamp & Insulation.. HIGH LIMIT USED ON 2006+ MODEL HOT SPOT AND SOLANA MODEL SPAS. SENSOR DESIGN HAS CHANGE AND NOW KIT COMES WITH...

This part is a D-Tec 2 (1) Amp 2PSI Pressure Switch that features 1/8th" MPT Standard Threads and 2 Spade connectors for attaching the 2 wire connections and is Ideal for applications where a larger switch will not fit. This Switch is a...

This part is a 3 Terminal Power Block found on some Jacuzzi or Sundance Control pack and board set ups.. This part is found in some Jacuzzi Premium J-220, J-210, J-315, J-310, 2004 J-325, and 2008+ J-325 models and some Sundance 800 or 850 systems....

This part is a Terminal Block 4 Position 50A 230V.. that fits some Sundance and Jacuzzi control systems with (4) Tabs to connect the board to the components.. This Terminal Block is 3 7/8" wide x 1 13/16" tall..

You are purchasing a Fuse Holder Assembly, SC-25 or SC-30, Panel Mount..  This fuse holder requires a fuse sold here: Fuse SC-25 SC25 25 Amp Buss Bussman Littlefuse SLC25 1 X Spa Hot Tub Fuse SC-30 SC30 30 Amp Buss Littlefuse SLC30 Balboa Gecko...

This part is a complete New Old Stock Heater that was used on some Icon or Jumpking Hot Tub and Others.. Stainless steel, 1-1/2" x 8-1/2", 1.0kW/115v replacement heater with ground lug, (2) 1-32 x 3/8" mounting studs, and split nuts. The element is...

This part is a Circuit Board Kit, Expander for Balboa VS or EL Systems, Blower, w/10 Amp Fuse, w/Cables.. Circuit Board Application Balboa Water Group Circuit Board Model X-P Circuit Board Type New     Circuit...

You are purchasing a Fuse Holder Assembly, SC-20, 20A, Panel Mount..  This fuse holder requires a fuse sold here: Buss Fuse 20A SC 20 Amp Fuse Part Type Fuse Holder Fuse Style SC Series Fuse...

This part is a Flow Switch Tee Housing with a Barb, Sundance and Jacuzzi Premium Replacement, 3/4" Barb x 3/4" Barb x 3/8" Barb..