Hot Tub Control Pack Retrofit Systems

Balboa BPBEE Control System with 4.0kW Remote Heater and TP200T Panel. Includes Blackout Plate, Hang Mounts, Topside and Light Wire..  You would reuse your amp cables for pumps and blowers.. If your original control used cords other than Amp Cables...

Balboa BP100 Control System with 4.0kW Heater and TP200T Panel. Includes, Blackout Plate, Topside and Light Wire..   This system is compact and will run 1 or 2 Jet pumps or 1 Pump and a Blower and a Light..    You would reuse your amp...

This part is a Control System, Balboa, BP Series, BP2000G1, 5.5KW, 800 INC, BP2X, WiFi Capable   Unparalleled system reliability and innovative engineering. Utilizing higher resistant materials, the BP2000/2100 operates: 2-speed primary...

This part includes the replacement box only.   IN.YE-5-H4.0-AMP-GD1 Features: Supports 5 configurable outputs, 4kW heater, and a standard 12V light  Aeware controller for spa  in.touch WiFi module compatible  Works...

Balboa EL2001M3 Control System with 4.0kW HeaterThe Elite Series (EL) family of hot tub control systems were designed using Balboa's patented M7® temperature and water flow sensing technology and a new universal control platform. These features...

The Control System is designed to work with the Original No Fault Heater in your Hotspring Watkins tubs..  No Fault 1500, No Fault 4000, No Fault 6000 In other words it does not come with a Heater or sensors you would use the original in your tub....

The ePACK is a universal replacement spa control system that features a water sensor instead of a pressure or flow switch so this pack will work plumbed in the pressure or suction side. Heater assembly is 15″ long, it is mounted to the...

The next generation feature rich Balboa BP7 control system with a 4.0KW heater bundled with the sleek rectangle shaped 6 button TP500 topside control with large easy to read backlit LCD screen and simple to follow menus. Kit includes: system, panel,...

The Cheap Chinese Remote Heater Pack replacement is now available! It can even be used to replace a system with a remote heater or use the heater in it's factory spot. Note: Cables for Pump(s) and Ozone are Not IncludedOperates: Convertible 120/240V1...

This part is a  RS101 Balboa Spa Hot Tub Control Pack with 115V GFCI Cord.  This pack is found on Viking, RS101 Dream Maker Brand Hot Tubs and many more. This pack features a 120v cord and plug.. This System also uses M7 sensors and they can...

The MODPACK 101 is a universal replacement spa control system. Heater assembly is 15″ long, it is mounted to the back of the enclosure. To simplify the replacement process, heater tube height is adjustable so it aligns to...

This Kit is an ACC Smart Touch E-Pac LF with low flow heater Set Up. The heater on this unit isused with spas that have a low flow circulation pump such as a Laing or Grundfos pump. This unit will control a 2speed primary pump, a single speed blower or a...