Hot Tub Parts of America

This part includes the replacement box only. You Choose these packs based off of the original part number found on your pack label this part number is any of these: 3-72-7018 , 844259, 0602-221001 ,...

This part includes the replacement box only.   IN.YE-5-H4.0-AMP-GD1 Features: Supports 5 configurable outputs, 4kW heater, and a standard 12V light  Aeware controller for...

This complete pump and motor is a Aqua-Flo replacement Pump, 39583, 115V (2) Speed 48 frame 2" x 2" pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if...

This Item is a Wet End for a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part number...

This Replacement LX Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2" only that would be about 8.0 Amps at 230V Vendor Code 3536..  It is about 7 1/4"" across the face of the...

This part is a Replacement Diffuser for a 2" Cluster Storm Jet made by Waterway. These jet diffusers are removed by pulling the Jet face away from the duffuser and onto the jet face. I also have the...

This part is a Retaining Ring, HydroAir, Duo Blaster, Gray, for 1-3/4" Duo Jet..   Below are links to the related parts for this style Jet: Eyeball, HydroAir, Duo Blaster, Directional, Gray,...

This part is a Retaining Ring for a HydroAir Duo Blaster Roto Jet system.. It is Gray.. This jet has other parts the can be found in the below links and are sold separately: Retaining Ring, HydroAir,...

This Retaining Ring part is found inside of a Waterway Power Storm Jet Body... 3 5/16" overall width and the hole in the center is about 2 9/16".. It is held in with (2) Screws.. when this part...

Balboa BPBEE Control System with 4.0kW Heater and TP200T Panel. Includes, Blackout Plate, Topside and Light Wire..   This system is compact and will run 1 or 2 Jet pumps or 1 Pump and a Blower...

Balboa BPBEE Control System with 4.0kW Remote Heater and TP200T Panel. Includes Blackout Plate, Hang Mounts, Topside and Light Wire..  You would reuse your amp cables for pumps and blowers.. If...

The ePACK is a universal replacement spa control system that features a water sensor instead of a pressure or flow switch so this pack will work plumbed in the pressure or suction side...