Hot Tub Parts of America

This part is a Ozonator, JED, Corona Discharge, 230V, w/4 Pin Amp Cord JED 103-DescriptionThe JED103 is a CD or "corona discharge" type ozone generator designed for water purification in residential...

This part is a Ozone Check Valve, Del Ozone, 1/4"barb x 1/4"barb, Deluxe If this valve is bad you will get water in the Ozonator and possibly voltage in the water if your GFCI is not wired correctly...

This part is a Ozone Check Valve, Del Ozone, 1/4"barb x 1/4"barb with a 1/4" x 3/8" Barb Coupler and a 4" piece of 1/4" tubing to convert from 3/8" to 1/4".. If this valve is bad you will get water...

Ozone Check Valve 1/4" Barb x 1/4" Barb Prozone Viton.. If this valve is bad you will get water in the Ozonator and possibly voltage in the water if your GFCI is not wired correctly or a breaker trip...

This part is a Ozone Flash Reactor Replacement with a  3/4" Barb X 3/4" Barb connection.. It is used as a Mixing Chamber Mazzei on Ozone systems for Jacuzzi, Sundance, Master Spa and others..

This is an Ozone Injector made by Waterway, 3/4"Barb x 3/4"Barb x 3/8"Barb, White.. It is used to draw Ozone gas into the hot tub by creating suction when water is forced through it....

Ozone Install Kit, ASO, w/1/4" x 6ft Tubing & Check Valve Manufacturer AquaSunOzone Ozonator Part Type Install-Kit Ozonator Model Blue-Zone, Ozone-Otter

This part is an Ozone Venturi Injector, Ozone, AquaSunOzone, 3/4" Barb X 3/4" Barb x 1/4" Barb that is used inline to create suction to pull Ozone Gas from an Ozonator into the Hot Tub...

Retro-fit for Watkins tubs such as Hot Springs and Caldera that utilize the small low flow circulation pump and the No Fault 1500 and No Fault 4000 heaters only. The Control System is designed to...

This part is a PC Board Plastic Standoff Holder Kit 1/4" long, Reverse Lock Style, Pack of 12, Fits Balboa and some other Brands...  We also have the 3/4" Version Here: Click for 3/4" Standoff...

This part is a PC Board Plastic Standoff Holder Kit 3/4" long, Reverse Lock Style, Pack of 12, Fits Balboa and some other Brands...  We also offer the 1/4" version of this part: For the 1/4"...

This part is a Balboa BP series BP501G3 (Set-Up #1-3), works with TP Series Top Side Panel, Pump1-Blower/Pump2, 4 Pin Molex Connector. This board is used with TP Topsides only..and is commonly paired...