3HP WUA 300 Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2"

(1 review) Write a Review
SKU:
ASPWE-56WUA300II
Shipping:
Calculated at Checkout
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Compare your screws to be sure that this is the correct wet end.
  • This seal fits a pump that looks like this...
  • Compare your wet end to this picture to be sure that this is the correct wet end.
  • Compare your motor shaft to these to be sure...
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
  • Spa Hot Tub Pump Wet End 56Fr fits Intertek LX Pumps 2" X 2" 3HP WUA
MSRP: $139.99
$114.99
— You save $25.00

Description

NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX Parts


This 3 Horse Power 56 Frame Pump Wet End fits Intertek LX Brand Pump Motors only. These pumps usually have the part number WUA-300, WP-300 or LP-300 on the label.
 Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4 13/16" from the back to front edge. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. 

NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange! 

If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..

 

 

img-0842-clipped-rev-1.pngimg-0877-clipped-rev-1.pngimg-0847-clipped-rev-1.png

 

Click this link for the new Style Bleeder Barb: Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads

Note: This Wet End Fits Intertek Chinese LX and LP series Pumps only Some Pump Part numbers are as follows: (WUA300-II, WUA300-I)  (LP300) (WP300-II/,300-I)
 
 
To Install this wet end you will have to loosen the thru bolts and unscrew the impeller. There are time where you will have to disassemble the motor in order to loosen the impeller because they get stuck when they leak. Note: We offer parts for this wet end and complete pumps in our store. 
 
 
Visit our Store as we also offer these and other associated products and accessories for your Spa.
Please note: When you have a seal leaking in most cases you will need an impellor because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impellor. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
WUA200-II,WUA300-II,WUA400-II,WUA200-I,WUA300-I,WUA400-I,LP200,LP250,LP300,LP150,WP200-II,WP250-II,WP300-II,WP200-I,wp250-I,wp300-I,wp400-I
WUA200,WUA300,WUA400,WUA200,WUA300,WUA400,LP200,LP250,LP300,LP150,WP200,WP250,WP300,WP200,wp250,wp300,wp400,chinese,lx,guangdong,energy saver spa equipment
 
View AllClose

1 Review

  • 5
    Good parts, good service.

    Posted by Ken Scarola on Aug 9th 2018

    Spa Guy helped my diagnose my problem and select the correct part. The part was delivered on time, went together easily and is working great. What more could you ask for.

View AllClose