Waterfall Control Valves & Related Parts

Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...

This Kit is designed to repair a Artesian Waterway Pop Up Style Waterspout Fountain Top that has a pre-made Gasket that goes bad.. You cannot buy the gasket you have to buy the whole fountain or use this kit to repair it.. Watch the Video to see how...

This 1" Waterfall Control Plunger and Cap Replacement Kit is found in some 1" Waterfall or Neck Jet Control valves. This kit features the Cap, plunger and stem, The Gasket for the bottom of the plunger and clip that holds the stem inside the cap and an...

This Kit is a 3/8" Tubing Connect Kit with Glue for 3/8" Plumbing repairs where you are connecting old 3/8" Clear Tubing that measures about 1/2" OD between a cut air control line and the 3/8" Barb on an Air Manifold or Jet Body Air connection.. The kit...

This part is a Valve Stem Gate Only that is found inside of a CMP Brand Water Control Valve normally used for a Waterfall or Neck Jet Control, it is a full On/Off Valve Gate made by CMP.. If you need the complete valves and other parts that fit this...

This item is a LA Spa Gray Notched Replacement Diverter Cap for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small o-rings and one O-Ring Gasket that measures...

This item is a Replacement Waterfall Control 2 1/2" White Cap for a 1 1/2" Waterfall or Neck Jet Control found on Jacuzzi Premium and other brands.. This cap measures about 2 1/2" Edge to Edge and the center hole is about 1"..  For the Threaded Cap...

This item is a Replacement Waterfall Control 2 1/2" Gray Knob for a 1 1/2" Waterfall or Neck Jet Control found on Jacuzzi Premium and other brands.. This Knob measures about 3 1/8" Edge to Edge and the center Square hole is about 1/2"..  For the...

This Waterfall or Neck Jet Control Stem is Used in Waterway Top Access 100% shut-off valves 1". This valve has a piece of rubber on the backside to complete the seal..  Click on the links below for related part:  Spa Hot Tub 1" Waterfall or...

You are Buying a 2 1/2" Titanium colored 1" Dynasty Waterfall or Neck Jet Control Cap. This Cap Screws onto the Control Body that measures about 1 3/4" wide and Slides over the Diverter Valve Stem is used to operate a...

You are Buying a 1 1/2" Water Valve Handle that is about 3 3/4" Edge to Edge that fits some Dynasty Water Valves. The valve is Black in color. This Diverter handle Slides on the Air Control Valve Stem that measures about 1/2" and is...

This 1" Waterfall Control Plunger Replacement Kit is found in some 1" Waterfall or Neck Jet Control valves. This kit features the plunger and stem, The Gasket for the bottom of the plunger and clip that holds the stem inside the cap and an o-ring kit for...