Set of 2 Jacuzzi® J Pump Union 2" Slice Valve Coupler How To Video

(No reviews yet) Write a Review
SKU:
ASPjpumpunionslicekit2X
Shipping:
Calculated at Checkout
  • Set of 2 Jacuzzi® J Pump Union 2" Slice Valve Coupler How To Video
  • NOTE: This is a very Rare Pump union so if your pump does not have a beveled surface that the union screws to and it is flat this is not the correct one.. Look for a 2" Pump Union that measures almost the same as this one..
  • NOTE: This is a very Rare Pump union so if your pump does not have a beveled surface that the union screws to and it is flat this is not the correct one.. Look for a 2" Pump Union that measures almost the same as this one..
  • This is an example of this kit put together on a J pump..
  • Set of 2 Jacuzzi® J Pump Union 2" Slice Valve Coupler How To Video
  • Set of 2 Jacuzzi® J Pump Union 2" Slice Valve Coupler How To Video
  • Set of 2 Jacuzzi® J Pump Union 2" Slice Valve Coupler How To Video
  • Set of 2 Jacuzzi® J Pump Union 2" Slice Valve Coupler How To Video
  • Set of 2 Jacuzzi® J Pump Union 2" Slice Valve Coupler How To Video
MSRP: $102.98
$64.99
— You save $37.99

Description

This Kit is a Set of (2) 2" Spigot X 2" Slip Slice Gate Valve Kit with a Jacuzzi® J Style Pump Unions with O-rings, (2) 2" Street x Slip Slice Gate Valve and (2) 2" Couplers for glueing 2" plumbing to the slice valve. The Valve receives a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side. It will slip inside of the pump union and glue and screw to a Jacuzzi® J Pump fitting. The reason we offer the Coupler union is so you can use Purple Primer and Blue Glue to glue this kit to your old plumbing.. When you are gluing always glue the coupler to the old plumbing first and spin it until it stops.. Don't be confused we also offer a slice valve with a heater union look at where it it attached in the spa if it is attached to the pump and the plumbing is 2" and the pump wet end threads are Beveled and 3"across then this part is correct. This part the slice valve is used in hot tubs to stop the water so you could service the heater or the pump without draining the tub.
Note: This pump can be found in other brand hot tubs that are not names Jacuzzi® like Blue Ridge, Gatsby, White Springs and many others so look at the pictures and be sure before ordering. This part does not Fit a  Jacuzzi Premium Brand tub..  
 
 

Jacuzzi¨, J Pump, Union, 1 1/2", slp, 2", street,Fitting, Pump, Unions,Jacuzzi, J, 1-1/2"s x 2"spg, 31-1586-03 , 31-0860-02 , 31-1586-03-R2 , 31-1586-03R2 , 601410 , 806105378170 , 417-2160 , JWB#9233000,400-2160,89-105-1506,jcm,K,Km,seriesst27,st33,l,lc,lcun2,lt,lx,ltc,lcu,ltcu,lcm,ulcu,ulycu,
View AllClose