Waterway Complete Pumps

Waterway Complete Pumps

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
 
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP. 
   8.0 = .5 HP 
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
 
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
 
screen-shot-2015-10-27-at-12.56.04-pm.jpg
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket

    Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket

    MSRP: $15.98
    $8.99
    This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...
    MSRP: $15.98
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $15.98
    $8.99
    Subtotal:
  • Set of (2) 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater  or Pump Union ORing 
The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you verify that you have a 2 5/8" Center to center groove in your union for this O-Ring to fit into.. 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater  or Pump Union ORing

    Set of (2) 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater or Pump Union ORing

    MSRP: $15.99
    $8.99
    This Kit is a Set of (2) NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this...
    MSRP: $15.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $15.99
    $8.99
    Subtotal:
  • Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    MSRP: $13.99
    $9.99
    This part is a Bleeder Barb with Silicone & O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts &...
    MSRP: $13.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $13.99
    $9.99
    Subtotal:
  • Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    MSRP: $8.99
    $6.99
    This part is a Bleeder Barb with O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...
    MSRP: $8.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $8.99
    $6.99
    Subtotal:
  • Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit  Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Waterway Pump..

    Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $17.99
    $11.99
    This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air...
    MSRP: $17.99
    $11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $17.99
    $11.99
    Subtotal:
  • Spa Hot Tub Pump Universal Air Bleeder Plug 1/4" Mpt X 3/8" Barb Fitting An example of the bleeder system and this barb in use on a Waterway Pump..

    Spa Hot Tub Pump Universal Air Bleeder Plug 1/4" Mpt X 3/8" Barb Fitting

    MSRP: $9.99
    $6.99
    This part is a Universal Air Bleeder 1/4" Mpt X 3/8" Barb plug usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and measurements...
    MSRP: $9.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $9.99
    $6.99
    Subtotal:
  • Spa Hot Tub Pump Universal Air Bleeder Plug 1/4" Mpt X 3/8" Barb with Sealer Fitting An example of the bleeder system and this barb in use on a Waterway Pump..

    Spa Hot Tub Pump Universal Air Bleeder Plug 1/4" Mpt X 3/8" Barb with Sealer Fitting

    MSRP: $12.99
    $9.99
    This Kit is a Air Bleeder 1/4" Mpt X 3/8" Barb plug and Silicon sealer usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and...
    MSRP: $12.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $9.99
    Subtotal:
  • Barb Adapter, 3/8"b x 1/4"mpt, Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Pump..

    Barb Adapter, 3/8"b x 1/4"mpt, Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $9.99
    $6.99
    This part is a Air Bleeder barbed plug usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and measurements with...
    MSRP: $9.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $9.99
    $6.99
    Subtotal:
  • Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit  Pump Wet End Face fits Aqua-Flo & CMP An example of the bleeder system and this barb in use on a Waterway Pump..

    Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

    MSRP: $12.99
    $8.99
    This kit is a Air Bleeder barbed plug and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands of Hot Tubs just compare the pictures and...
    MSRP: $12.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $8.99
    Subtotal:
  • Barb Bleeder 1/4" Mpt X 3/8" with Silicon Kit for Waterway Pump Fitting An example of the bleeder system and this barb in use on a Waterway Pump..

    Barb Bleeder 1/4" Mpt X 3/8" with Silicon Kit for Waterway Pump Fitting

    MSRP: $14.99
    $10.99
    This kit is anAir Bleeder barbed plug and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the pictures and measurements with your...
    MSRP: $14.99
    $10.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $14.99
    $10.99
    Subtotal:
  • Barb Adapter, 3/8"b x 1/4"mpt Pump Wet End Face fits Waterway An example of the bleeder system and this barb in use on a Waterway Pump..

    Barb Adapter, 3/8"b x 1/4"mpt Pump Wet End Face fits Waterway

    MSRP: $11.99
    $8.99
    This part is a Bleeder Barb that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...
    MSRP: $11.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $11.99
    $8.99
    Subtotal:
  • Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket Video How To Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket Video How To

    Hot Tub Spa 1 1/2" Slip X 1 1/2" Pump Union with Gasket Video How To

    MSRP: $12.99
    $9.99
    This part is a 1 1/2" Slip X 1 1/2" Pump Union with Gasket or Oring that matches Union. See Pictures for measurements. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wet...
    MSRP: $12.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $9.99
    Subtotal:
  • Total: items /

Adding your products to cart