Water Manifold, 3/4" barb, 4 Port, Flow Thru, 1-1/2"Slip x 1-1/2" Street

(No reviews yet) Write a Review
SKU:
HTP672-CB50
Shipping:
Calculated at Checkout
  • The manifold featured in this kit is Open on both ends.. One end receives a 1 1/2" Pipe or fitting that would measure 1 7/8" Outside Diameter and on the other end glues inside of a 1 1/2" fitting that would measure 1 7/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 1 1/2" Pipe or fitting that would measure 1 7/8" Outside Diameter and on the other end glues inside of a 1 1/2" fitting that would measure 1 7/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 1 1/2" Pipe or fitting that would measure 1 7/8" Outside Diameter and on the other end glues inside of a 1 1/2" fitting that would measure 1 7/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 1 1/2" Pipe or fitting that would measure 1 7/8" Outside Diameter and on the other end glues inside of a 1 1/2" fitting that would measure 1 7/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 1 1/2" Pipe or fitting that would measure 1 7/8" Outside Diameter and on the other end glues inside of a 1 1/2" fitting that would measure 1 7/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 1 1/2" Pipe or fitting that would measure 1 7/8" Outside Diameter and on the other end glues inside of a 1 1/2" fitting that would measure 1 7/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 1 1/2" Pipe or fitting that would measure 1 7/8" Outside Diameter and on the other end glues inside of a 1 1/2" fitting that would measure 1 7/8" Inside Diameter..
  • The manifold featured in this kit is Open on both ends.. One end receives a 1 1/2" Pipe or fitting that would measure 1 7/8" Outside Diameter and on the other end glues inside of a 1 1/2" fitting that would measure 1 7/8" Inside Diameter..
MSRP: $19.99
$14.99
— You save $5.00

Description

This part is a 1 1/2" Street X 1 1/2" Slip X (4) 3/4" Smooth Barbs manifold and a single barb plug in case you only need 3 barbs instead of 4.

The Manifold receives a 1 1/2" pipe on the slip side which would measure about 1 7/8" outside Diameter and then glues inside of a 1 1/2" Fitting which would measure about 1 7/8" ID on the street side with (4) 3/4" Barb Fittings. 

You can put this with other manifolds I am offering to make up the size manifold you need or choose a kit that we offer in the store. 


Barb/Port Size    3/4"
Barb Port Type    Smooth Barb (sb)
Number of Ports    4
Manifold Fitting Type    Flow-Thru
Manifold Plumbing Size "A"    1-1/2"
Manifold Plumbing Type "A"    Slip (s)
Manifold Plumbing Size "B"    1-1/2"
Manifold Plumbing Type "B"    Spigot (spg)

View AllClose