Impeller, StaRite, DuraJet, DJ, 2.0hp, 10-11.0 Amps

This part is a 2HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0122 cast into the back and will measure about 3 3/4" wide with an eye width of 1 1 3/4" and a vane width of 1/2".. This can be found on motors with an amperage of 10.0 Amps to 11.0 Amps at 230V on High Speed..

For seal kits that fit this pump click this link: 201 Seal Kits

For a face o-ring for this Wet End Click this link: Wet End O-Ring 5-1/8" ID, 3/16" Cross Section Sta-Rite Starite Dura-Jet DJ Series

 
Impeller Type    Closed Face
Impeller Diameter OD    3-3/4"
Vane Width ID    1/2"
Eye Diameter OD    1-3/4"
Eye Length    1/2"
Impeller Width OD    5/8"
Seal Seat Depth    n/a
Shaft Length    1-13/16"
Shaft Diameter OD    3/4"
Seal Seat Diameter OD    n/a
Manufacturer    Sta-Rite/Balboa
Pump Application    Dura-Jet