JACUZZI® PREMIUM Hot Tub Parts

This part is a Wet End, Circulation, TheraMax II, 1/15hp, 230v, 1-1/2" Side Discharge, Sundance , Jacuzzi, 02410512-2 or 6500-907.  The Model# on the pump this would fit would be 02410512-2 or 6500-907.. This pump is a 48 frame 230V Side Discharge...

This part is a Complete Wet End for a Sundance, TheraMax II, 6500-901 or 6500-902, 2.5HP, 230v, 56fr, 2"X 2" 11-12A with a 2" suction side and 2" pressure side which measures about 3" edge to edge. The amperage on the motore this would be on is about12...

This Wet End with Barb is a 2.5 Horse Power that fits Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this Wet End fits will have the part number 6500-352, 6500-365, 6500-367 or 6500-363 on the label along with WUA400-I or WAU400-II...

This Wet End is a 2.5 Horse Power that fits Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this Wet End fits will have the part number 6500-352, 6500-365, 6500-367 or 6500-363 on the label along with WUA400-I or WAU400-II. Note: You...

This jet is becoming very hard to get if you purchase one we will search to find one close the picture.. The face style and color may vary but it is better than no jet.. This part is a Diverter Jet that fits some Sundance, Jacuzzi hot tubs. It is a...

This part is a Balboa Heater M7 Sensor with a 82" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This part is a Balboa Heater M7 Sensor with a 46" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This part is a Heater M7 Sensor with a 31" wire found in Jacuzzi Premium J series 2016 to current.  Note: This sensor does not have the nut and washer on it so it will only work with Jacuzzi Premium hot tubs..   Application Balboa...

This part is a Ozone Flash Reactor Replacement with a  3/4" Barb X 3/4" Barb connection.. It is used as a Mixing Chamber Mazzei on Ozone systems for Jacuzzi, Sundance, Master Spa and others..

This kit is a Repair kit for a 2007+ 4" Wide Capped JACUZZI® Premium J Series 300 and some 400 Model Spa Diverter Valves. This Kit comes with The Cap, Handle, Stem Gate Valve, (2) Small O-Rings and (1) Large O-Ring. The Valve...

This 3.0HP Impeller fits a Jacuzzi/Carvin Wet End only and would be found on a motor that is about 12.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo and is found on Jacuzzi Premium J Series Tubs and well as Sundance, I...

This 1.5HP Impeller fits a Jacuzzi/Carvin Wet End only and would be found on a motor that is about 13.5 Amps at 115V or 9.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo and is found on Jacuzzi Premium J Series Tubs and...