Cal Spa Hot Tub Parts

This Kit is an Upgraded 3 3/4" Wide Buttress Silver Diverter Valve Cap, Valve Stem with a Black Knob and O-Ring Kit. This Kit comes with The Teardrop Handle, Valve Stem, Buttress Cap and (2) Small O-Rings and (1) Large O-Ring...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...

You are buying a Cal Spa 7000 or 9000 Heater M7 foam type Sensor. This Sensor comes with the wire, Connector, and The foam sensor. It DOES NOT include the tube, the tube side mount or the pull ties. When this sensor is bad it will generally cause a SN...

Power-Right Pump Impeller Note: This Impeller is Obsolete so I have only (1) left.. This is the Reverse Side Closed face impeller made for the Power-Right PR420-5R Dually spa pumps. Seals & kits for this Impeller can be found here: 201...

This part is a 4.0KW Titanium (Best) Heater Element.  This Heater Element features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, Spa Guts, Spa Builders Len Gordon, Brett Aqualine,...

You are purchasing a Hot Tub Spa Cover (4) Wind Strap Latch Kit with (8) Cal Cover Style Side Mount Lock Latchs, (4) 12' Straps with (8) Buckle Clips each, (24) Screws and (2) Keys that fits the original Factory covers on most Catalina and Cal Spa Hot...

You are buying a Set of (2) 2" Heater Split Nut with 2" Slip X 2" Thread Heater Union Kit which includes (2) Split Nuts , (4) Screws, (2) 2" Slip X 2" Threaded Unions and gaskets for use with a 2" Heater Union as well as (2) 2" Slip x 2" Street...

This part is a Vacuum Switch like you will find on some  Cal Spas in the suction side of the pump. Specs V4001P-DX Replacement, 21A, 1/8"mpt. For a switch like the original click this link: PresAirTrol Style Vacuum Switch This is a normally open...

This Filter Cartridge fits Some New Cal Spa and Marquis Spas. It is 12 1/2" Tall x 5 3/16" Wide with 2" Mpt Threads which is a think thread that measures about 2 3/8" outside diameter. The MPT Threads measure between 2 1/4 and 2 3/8" edge to edge. It...