This Part is a 56 Frame Face Plate for a Guangdong LX Brand Pump Wet End only this face plate uses coarse thread bleeder plugs be sure to compare your old plugs to the pictures..Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 7 3/4"" across the face, it measures about 2 1/4" from the bottom to the top width, it also measures 3" across the threads. The Suction and Pressure side thread fittings are called 2" x 2" but measure 3" from the edge of the thread to the edge of the thread. NOTE: This Face looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange!
Note: This Face Fits Guangdong Chinese LX and LP series Pumps only Some Pump Part numbers are as follows: (WUA400-II, WUA400-I) (LP400) (WP400-II/,400-I), (WUA350-II, WUA350-I) (LP350) (WP350-II/,350-I), (WUA300-II, WUA300-I) (LP300) (WP300-II/,300-I), (WUA200-II, WUA200-I) (LP200) (WP200-II/,200-I)
NOTE: This Part will Fit Sundance®or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click hereJacuzzi® & Sundance® LX Parts
To Install this face plate you will have to loosen the (8) Face bolts and pry the face off transfer your old bleeder plugs and outside o-ring and reinstall the face tightening the screws... Note: We offer parts for this wet end and complete pumps in our store.Choose with care, I Do Not accept returns so be sure these are correct before ordering!
1000, VG-1000, USSPS1000B, 5250-106, AS-1000, 071734S, PS-1000,319-3100B,waterway, executive, hiflo, hi-flo, wet end, wet end, spa wet end seal , hot tub wet end seal, 1000 seal, p-1000 seal, ps-1000 seal, p 1000 seal, ps 1000 seal
Visit our Store as we also offer these and other associated products and accessories for your Spa.
Please note: When you have a seal leaking in most cases you will need an impellor because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impellor. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
I installed these on import lx pumps. They fit like they should. I had to add wear rings to my impellers. After that the work like the OEM housing covers. The guy I spoke with was I formative on what I need to do. My tub is a import but it looks like they may be able to help me on other parts. Thanks.
Posted by Dallas on Aug 17th 2017
My old face plate cracked out where the threads meet the housing. This is an exact fit and comes with the o-ring.