Center Mount, Flow Thru Element, 5.5kW, 115v or 230v, 10", Middle Terminal

(No reviews yet) Write a Review
SKU:
HTP47-555-2310
Shipping:
Calculated at Checkout
  • Center Mount, Flow Thru Element, 5.5kW, 115v or 230v, 10", Middle Terminal
  • Center Mount, Flow Thru Element, 5.5kW, 115v or 230v, 10", Middle Terminal
  • Center Mount, Flow Thru Element, 5.5kW, 115v or 230v, 10", Middle Terminal
  • Center Mount, Flow Thru Element, 5.5kW, 115v or 230v, 10", Middle Terminal
MSRP: $79.99
$59.99
— You save $20.00

Description

This part is a Center Mount 5.5KW Incoloy Heater Element for 230V or 115V Applications.

Center mount means the holes for the electrodes are in the center of the tube to to one side or the other.. This is a very rare style but they are out there.. 

For the 4.0KW Version of this Element Click this Link: 4.0KW Center Mount Element

Note: When testing this heater if it trips the breaker simply unplug it and if the breaker stays on plug back in and if it trips this heater is the cause if it is not a breaker trip issue then measure between the two terminals with an Ohm meter it should measure about 10.5K ohms. If it measures 0K it is open. If it is not tripping the breaker and doesn't measure open then the heater is not bad look for other issues that cause no heat Like a Pressure Switch, Stopped up filter, No water movement, Open circuit on board etc…..  
On this particular heater the pressure switch is included and it can cause a no heat condition and can be purchased separately.
 
Heater Application Generic
Heater Element Type Flow Thru, Middle
Heater Element Connection Size 1/2" x 1-1/4"
Kilowatts 1.375kW/5.5kW
Immersion Length/Depth 10"
Thermowell Size None
Voltage 115v/230v
Coating None

View AllClose

Related Products