Complete Pump, Aqua-Flo, FMHP, 1.5HP, 115v, 48fr, 1-1/2" x 1 1/2" , 1 or 2 Speed 13.3A

(1 review) Write a Review
SKU:
HTP34-402-5008
Shipping:
Calculated at Checkout
  • Complete Pump, Aqua-Flo, FMHP, 1.5HP, 115v, 48fr, 1-1/2" x 1 1/2" , 1 or 2 Speed  13.3A
  • The inlet and outlet measure about 2 5/16" across the threads.. 
Complete Pump, Aqua-Flo, FMHP, 1.5HP, 115v, 48fr, 1-1/2" x 1 1/2" , 1 or 2 Speed  15.0A
  • The inlet and outlet measure about 2 5/16" across the threads.. 
Complete Pump, Aqua-Flo, FMHP, 1.5HP, 115v, 48fr, 1-1/2" x 1 1/2" , 1 or 2 Speed  15.0A
  • Complete Pump, Aqua-Flo, FMHP, 1.5HP, 115v, 48fr, 1-1/2" x 1 1/2" , 1 or 2 Speed  13.3A
  • Complete Pump, Aqua-Flo, FMHP, 1.5HP, 115v, 48fr, 1-1/2" x 1 1/2" , 1 or 2 Speed  13.3A
  • Complete Pump, Aqua-Flo, FMHP, 1.5HP, 115v, 48fr, 1-1/2" x 1 1/2" , 1 or 2 Speed  13.3A
MSRP: $641.99
$519.99
— You save $122.00

Description

This Pump is a 48Frame 115V 2 Speed with a 1.5 HP Wet End that features a 1 1/2" x 1 1/2" Side Discharge Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 13.3 and low speed is 4.1 Amps..
 
 
Complete Pump Type92770501
  Portable Spa Pump
Speed 2 Speed (2-Spd)
Motor Voltage 115v
Drain Plug Location 6,9 o`clock
Pump to Motor Foot Types 15
Suction Style Center
Suction Connection (Physical Dimension) 1-7/8"id, 2-7/16"od
Suction Connection Type Female Pipe Thread (fpt), Male Buttress Thread (mbt)
Suction Pipe Size 1-1/2"
Discharge Style Side
Discharge Connection (Physical Dimension) 1-7/8"id, 2-7/16"od
Discharge Connection Type Female Pipe Thread (fpt), Male Buttress Thread (mbt)
Discharge Pipe Size 1-1/2"
Horsepower 1.5hp
Motor Frame 48 Frame Thru-Bolt
Motor Amperage/Wattage 13.3A/4.1A
Manufacturer AquaFlo/Gecko
Pump Model Flo-Master FMHP
 
 

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 

For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example.

8.0 = 1 HP

10.0 = 2 HP

12.0 = 3 HP

14.0 = 4 HP

16.0 = 5 HP

 

For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP.

  8.0 = .5 HP

9.0-10.0 = .75 HP

10.0-13.00 = 1 HP

13.5-15.0 = 1.5 HP

16.0-20.0 = 2 HP

Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.

 

NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.

NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.

View AllClose

1 Review

  • 5
    Quiet and effecient

    Posted by Unknown on Feb 5th 2018

    works perfectly, and relatively simple to install

View AllClose